This patch disables the use of non-free code distributed with SDCC by removing - The "--disable-non-free" option to "configure" and the build logic it controls; - All references to the "device/non-free" source directory and the corresponding "non-free" installation directory; and - The "--use-non-free" and "--no-warn-non-free" compiler options and references to them in build scripts and compiler output. It also updates SDCC's documentation to reflect these changes and to remove instructions that encourage the use of SDCC with non-free software. diff --git a/Makefile.common.in b/Makefile.common.in index 1a11f67..69d5efe 100644 --- a/Makefile.common.in +++ b/Makefile.common.in @@ -73,7 +73,6 @@ OPT_DISABLE_PACKIHX = @OPT_DISABLE_PACKIHX@ OPT_DISABLE_SDBINUTILS = @OPT_DISABLE_SDBINUTILS@ OPT_DISABLE_SDCPP = @OPT_DISABLE_SDCPP@ OPT_DISABLE_UCSIM = @OPT_DISABLE_UCSIM@ -OPT_DISABLE_NON_FREE = @OPT_DISABLE_NON_FREE@ SLIB = $(top_builddir)/support/util diff --git a/Makefile.in b/Makefile.in index d899b62..554a1c3 100644 --- a/Makefile.in +++ b/Makefile.in @@ -105,9 +105,6 @@ endif ifeq ($(OPT_DISABLE_DEVICE_LIB), 0) TARGETS += sdcc-device-lib PKGS += device/lib -ifeq ($(OPT_DISABLE_NON_FREE), 0) -PKGS += device/non-free/lib -endif endif ifeq ($(OPT_DISABLE_PACKIHX), 0) @@ -128,9 +125,6 @@ endif TARGETS += sdcc-libs sdcc-cc sdcc-device-inc sdcc-as sdcc-ld sdcc-scripts PKGS += $(SDCC_LIBS) src device/include -ifeq ($(OPT_DISABLE_NON_FREE), 0) -PKGS += device/non-free/include -endif PKGS += $(SDCC_AS) sdas/linksrc $(SDCC_SCRIPTS) PORTS = $(shell cat ports.build) @@ -176,21 +170,12 @@ sdcc-sdbinutils: sdcc-device-inc: $(MAKE) -C device/include -ifeq ($(OPT_DISABLE_NON_FREE), 0) - $(MAKE) -C device/non-free/include -endif sdcc-device-lib: sdcc-cc sdcc-as sdcc-ld $(SDCC_BINUTILS) $(MAKE) -C device/lib -ifeq ($(OPT_DISABLE_NON_FREE), 0) - $(MAKE) -C device/non-free/lib -endif sdcc-device-tini: $(MAKE) -C device/include -ifeq ($(OPT_DISABLE_NON_FREE), 0) - $(MAKE) -C device/non-free/include -endif $(MAKE) -C device/lib model-ds390 model-ds400 # doc depends on latex and latex2html diff --git a/configure b/configure index 232d98e..3eeb17c 100755 --- a/configure +++ b/configure @@ -659,7 +659,6 @@ LATEX LATEX2HTML LYX OPT_ENABLE_DOC -OPT_DISABLE_NON_FREE OPT_DISABLE_SDBINUTILS OPT_DISABLE_SDCDB OPT_DISABLE_SDCPP @@ -690,10 +689,7 @@ OPT_DISABLE_R2K OPT_DISABLE_Z180 OPT_DISABLE_Z80 OPT_DISABLE_MCS51 -non_free_lib_dir_suffix lib_dir_suffix -non_free_include_dir_suffix -non_free_inclib_dir_suffix include_dir_suffix inclib_dir_suffix LIB_TYPE @@ -821,7 +817,6 @@ enable_packihx enable_sdcpp enable_sdcdb enable_sdbinutils -enable_non_free enable_doc enable_libgc ' @@ -842,10 +837,7 @@ sdccconf_h_dir_separator LIB_TYPE inclib_dir_suffix include_dir_suffix -non_free_inclib_dir_suffix -non_free_include_dir_suffix lib_dir_suffix -non_free_lib_dir_suffix docdir' ac_subdirs_all='support/cpp support/packihx @@ -853,9 +845,7 @@ sim/ucsim debugger/mcs51 support/sdbinutils device/lib/pic14 -device/non-free/lib/pic14 -device/lib/pic16 -device/non-free/lib/pic16' +device/lib/pic16' # Initialize some variables set by options. ac_init_help= @@ -1509,7 +1499,6 @@ Optional Features: --disable-sdcpp Disables building sdcpp --disable-sdcdb Disables building sdcdb --disable-sdbinutils Disables configuring and building of sdbinutils - --disable-non-free Disables non-free runtime library parts --enable-doc Enables building the documentation --enable-libgc Use the Bohem memory allocator. Lower runtime footprint. @@ -1538,16 +1527,8 @@ Some influential environment variables: appended to datadir to define SDCC's include/lib directory include_dir_suffix appended to datadir to define SDCC's include directory - non_free_inclib_dir_suffix - appended to datadir to define SDCC's non-free include/lib - directory - non_free_include_dir_suffix - appended to datadir to define SDCC's non-free include directory lib_dir_suffix appended to datadir to define SDCC's library root directory - non_free_lib_dir_suffix - appended to datadir to define SDCC's non-free library root - directory docdir documentation installation directory Use these variables to override the choices made by `configure' or to help @@ -7421,19 +7402,6 @@ if test "${include_dir_suffix}" = ""; then include_dir_suffix="${inclib_dir_suffix}/include" fi - -if test "${non_free_inclib_dir_suffix}" = ""; then - non_free_inclib_dir_suffix="sdcc/non-free" -fi - -# non_free_include_dir_suffix: -# *nix default: "sdcc/non-free/include" - - -if test "${non_free_include_dir_suffix}" = ""; then - non_free_include_dir_suffix="${non_free_inclib_dir_suffix}/include" -fi - # lib_dir_suffix: # *nix default: "sdcc/lib" @@ -7441,13 +7409,6 @@ if test "${lib_dir_suffix}" = ""; then lib_dir_suffix="${inclib_dir_suffix}/lib" fi -# non_free_lib_dir_suffix: -# *nix default: "sdcc/non-free/lib" - -if test "${non_free_lib_dir_suffix}" = ""; then - non_free_lib_dir_suffix="${non_free_inclib_dir_suffix}/lib" -fi - # docdir: # *nix default: "${datadir}/sdcc/doc" @@ -7600,22 +7561,6 @@ esac printf "%s\n" "#define INCLUDE_DIR_SUFFIX DIR_SEPARATOR_STRING \"${norm_inc_dir_suffix}\"" >>confdefs.h -norm_non_free_inc_dir_suffix=${non_free_include_dir_suffix} -case ":$norm_non_free_inc_dir_suffix:" in - ::) norm_non_free_inc_dir_suffix='.' ;; - :*[\\/]:) norm_non_free_inc_dir_suffix=`echo "$norm_non_free_inc_dir_suffix" | sed 's,[\\/]*$,,'` ;; - :*:) ;; -esac -case $sdccconf_h_dir_separator in - - *\\*) norm_non_free_inc_dir_suffix=`echo "$norm_non_free_inc_dir_suffix" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g - s,^[\\/],\\\\\\\\,'` ;; - - *) norm_non_free_inc_dir_suffix=`echo "$norm_non_free_inc_dir_suffix" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;; -esac - -printf "%s\n" "#define NON_FREE_INCLUDE_DIR_SUFFIX DIR_SEPARATOR_STRING \"${norm_non_free_inc_dir_suffix}\"" >>confdefs.h - norm_lib_dir_suffix=${lib_dir_suffix} case ":$norm_lib_dir_suffix:" in @@ -7633,22 +7578,6 @@ esac printf "%s\n" "#define LIB_DIR_SUFFIX DIR_SEPARATOR_STRING \"${norm_lib_dir_suffix}\"" >>confdefs.h -norm_non_free_lib_dir_suffix=${non_free_lib_dir_suffix} -case ":$norm_non_free_lib_dir_suffix:" in - ::) norm_non_free_lib_dir_suffix='.' ;; - :*[\\/]:) norm_non_free_lib_dir_suffix=`echo "$norm_non_free_lib_dir_suffix" | sed 's,[\\/]*$,,'` ;; - :*:) ;; -esac -case $sdccconf_h_dir_separator in - - *\\*) norm_non_free_lib_dir_suffix=`echo "$norm_non_free_lib_dir_suffix" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g - s,^[\\/],\\\\\\\\,'` ;; - - *) norm_non_free_lib_dir_suffix=`echo "$norm_non_free_lib_dir_suffix" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;; -esac - -printf "%s\n" "#define NON_FREE_LIB_DIR_SUFFIX DIR_SEPARATOR_STRING \"${norm_non_free_lib_dir_suffix}\"" >>confdefs.h - # relative paths for _lcl_i in expanded_bindir:expanded_datadir:bin2data_dir; do @@ -8751,27 +8680,6 @@ printf "%s\n" "#define OPT_DISABLE_SDBINUTILS $OPT_DISABLE_SDBINUTILS" >>confdef - # Check whether --enable-non-free was given. -if test ${enable_non_free+y} -then : - enableval=$enable_non_free; -fi - - - arg1=`echo non-free | sed s/-/_/` - - if test "`eval echo \\$enable_$arg1`" = "no"; then - OPT_DISABLE_NON_FREE=1 - else - OPT_DISABLE_NON_FREE=0 - fi - - -printf "%s\n" "#define OPT_DISABLE_NON_FREE $OPT_DISABLE_NON_FREE" >>confdefs.h - - - - # Check whether --enable-doc was given. if test ${enable_doc+y} @@ -9199,20 +9107,12 @@ if test $OPT_DISABLE_PIC14 = 0; then test $OPT_DISABLE_DEVICE_LIB = 0 && subdirs="$subdirs device/lib/pic14" -fi -if test $OPT_DISABLE_PIC14 = 0 && test $OPT_DISABLE_NON_FREE = 0; then - test $OPT_DISABLE_DEVICE_LIB = 0 && subdirs="$subdirs device/non-free/lib/pic14" - fi if test $OPT_DISABLE_PIC16 = 0; then ac_config_files="$ac_config_files src/pic16/Makefile" test $OPT_DISABLE_DEVICE_LIB = 0 && subdirs="$subdirs device/lib/pic16" -fi -if test $OPT_DISABLE_PIC16 = 0 && test $OPT_DISABLE_NON_FREE = 0; then - test $OPT_DISABLE_DEVICE_LIB = 0 && subdirs="$subdirs device/non-free/lib/pic16" - fi if test $OPT_DISABLE_Z80 = 0 || test $OPT_DISABLE_Z180 = 0 || test $OPT_DISABLE_R2K = 0 || test $OPT_DISABLE_R2KA = 0 || test $OPT_DISABLE_R3KA = 0 || test $OPT_DISABLE_SM83 = 0 || test $OPT_DISABLE_TLCS90 = 0 || test $OPT_DISABLE_EZ80_Z80 = 0 || test $OPT_DISABLE_Z80N = 0; then @@ -9289,15 +9189,9 @@ fi test $OPT_DISABLE_DEVICE_LIB = 0 && ac_config_files="$ac_config_files device/lib/Makefile" -test $OPT_DISABLE_DEVICE_LIB = 0 && test $OPT_DISABLE_NON_FREE = 0 && ac_config_files="$ac_config_files device/non-free/lib/Makefile" - ac_config_files="$ac_config_files main.mk:main_in.mk src/Makefile device/include/Makefile sdas/linksrc/Makefile support/makebin/Makefile support/regression/Makefile support/valdiag/Makefile support/scripts/Makefile support/regression/ports/host/spec.mk:support/regression/ports/host/spec.mk.in Makefile Makefile.common:Makefile.common.in" -if test $OPT_DISABLE_NON_FREE = 0; then - ac_config_files="$ac_config_files device/non-free/include/Makefile" - -fi cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure @@ -10037,7 +9931,6 @@ do "device/lib/pdk15-stack-auto/Makefile") CONFIG_FILES="$CONFIG_FILES device/lib/pdk15-stack-auto/Makefile" ;; "sdas/aspdk16/Makefile") CONFIG_FILES="$CONFIG_FILES sdas/aspdk16/Makefile" ;; "device/lib/Makefile") CONFIG_FILES="$CONFIG_FILES device/lib/Makefile" ;; - "device/non-free/lib/Makefile") CONFIG_FILES="$CONFIG_FILES device/non-free/lib/Makefile" ;; "main.mk") CONFIG_FILES="$CONFIG_FILES main.mk:main_in.mk" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "device/include/Makefile") CONFIG_FILES="$CONFIG_FILES device/include/Makefile" ;; @@ -10049,7 +9942,6 @@ do "support/regression/ports/host/spec.mk") CONFIG_FILES="$CONFIG_FILES support/regression/ports/host/spec.mk:support/regression/ports/host/spec.mk.in" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "Makefile.common") CONFIG_FILES="$CONFIG_FILES Makefile.common:Makefile.common.in" ;; - "device/non-free/include/Makefile") CONFIG_FILES="$CONFIG_FILES device/non-free/include/Makefile" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac @@ -10856,54 +10748,6 @@ esac incPath3=`echo "$incPath3" | sed 's,\\\\\\\\,\\\\,g'` -nonFreeIncPath1=`echo "/${prefix2data_dir}/${norm_non_free_inc_dir_suffix}" | sed 's,/\./,/,g'` -case ":$nonFreeIncPath1:" in - ::) nonFreeIncPath1='.' ;; - :*[\\/]:) nonFreeIncPath1=`echo "$nonFreeIncPath1" | sed 's,[\\/]*$,,'` ;; - :*:) ;; -esac -case $dirch in - - *\\*) nonFreeIncPath1=`echo "$nonFreeIncPath1" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g - s,^[\\/],\\\\\\\\,'` ;; - - *) nonFreeIncPath1=`echo "$nonFreeIncPath1" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;; -esac -nonFreeIncPath1=`echo "$nonFreeIncPath1" | sed 's,\\\\\\\\,\\\\,g'` - - -nonFreeIncPath2=`echo "/${bin2data_dir}/${norm_non_free_inc_dir_suffix}" | sed 's,/\./,/,g'` -case ":$nonFreeIncPath2:" in - ::) nonFreeIncPath2='.' ;; - :*[\\/]:) nonFreeIncPath2=`echo "$nonFreeIncPath2" | sed 's,[\\/]*$,,'` ;; - :*:) ;; -esac -case $dirch in - - *\\*) nonFreeIncPath2=`echo "$nonFreeIncPath2" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g - s,^[\\/],\\\\\\\\,'` ;; - - *) nonFreeIncPath2=`echo "$nonFreeIncPath2" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;; -esac -nonFreeIncPath2=`echo "$nonFreeIncPath2" | sed 's,\\\\\\\\,\\\\,g'` - - -nonFreeIncPath3=`echo "${expanded_datadir}/${norm_non_free_inc_dir_suffix}" | sed 's,/\./,/,g'` -case ":$nonFreeIncPath3:" in - ::) nonFreeIncPath3='.' ;; - :*[\\/]:) nonFreeIncPath3=`echo "$nonFreeIncPath3" | sed 's,[\\/]*$,,'` ;; - :*:) ;; -esac -case $dirch in - - *\\*) nonFreeIncPath3=`echo "$nonFreeIncPath3" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g - s,^[\\/],\\\\\\\\,'` ;; - - *) nonFreeIncPath3=`echo "$nonFreeIncPath3" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;; -esac -nonFreeIncPath3=`echo "$nonFreeIncPath3" | sed 's,\\\\\\\\,\\\\,g'` - - libPath1=`echo "/${prefix2data_dir}/${norm_lib_dir_suffix}" | sed 's,/\./,/,g'` case ":$libPath1:" in @@ -10953,54 +10797,6 @@ esac libPath3=`echo "$libPath3" | sed 's,\\\\\\\\,\\\\,g'` -nonFreeLibPath1=`echo "/${prefix2data_dir}/${norm_non_free_lib_dir_suffix}" | sed 's,/\./,/,g'` -case ":$nonFreeLibPath1:" in - ::) nonFreeLibPath1='.' ;; - :*[\\/]:) nonFreeLibPath1=`echo "$nonFreeLibPath1" | sed 's,[\\/]*$,,'` ;; - :*:) ;; -esac -case $dirch in - - *\\*) nonFreeLibPath1=`echo "$nonFreeLibPath1" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g - s,^[\\/],\\\\\\\\,'` ;; - - *) nonFreeLibPath1=`echo "$nonFreeLibPath1" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;; -esac -nonFreeLibPath1=`echo "$nonFreeLibPath1" | sed 's,\\\\\\\\,\\\\,g'` - - -nonFreeLibPath2=`echo "/${bin2data_dir}/${norm_non_free_lib_dir_suffix}" | sed 's,/\./,/,g'` -case ":$nonFreeLibPath2:" in - ::) nonFreeLibPath2='.' ;; - :*[\\/]:) nonFreeLibPath2=`echo "$nonFreeLibPath2" | sed 's,[\\/]*$,,'` ;; - :*:) ;; -esac -case $dirch in - - *\\*) nonFreeLibPath2=`echo "$nonFreeLibPath2" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g - s,^[\\/],\\\\\\\\,'` ;; - - *) nonFreeLibPath2=`echo "$nonFreeLibPath2" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;; -esac -nonFreeLibPath2=`echo "$nonFreeLibPath2" | sed 's,\\\\\\\\,\\\\,g'` - - -nonFreeLibPath3=`echo "${expanded_datadir}/${norm_non_free_lib_dir_suffix}" | sed 's,/\./,/,g'` -case ":$nonFreeLibPath3:" in - ::) nonFreeLibPath3='.' ;; - :*[\\/]:) nonFreeLibPath3=`echo "$nonFreeLibPath3" | sed 's,[\\/]*$,,'` ;; - :*:) ;; -esac -case $dirch in - - *\\*) nonFreeLibPath3=`echo "$nonFreeLibPath3" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g - s,^[\\/],\\\\\\\\,'` ;; - - *) nonFreeLibPath3=`echo "$nonFreeLibPath3" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;; -esac -nonFreeLibPath3=`echo "$nonFreeLibPath3" | sed 's,\\\\\\\\,\\\\,g'` - - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: sdcc ${VERSION} is now configured for @@ -11041,7 +10837,6 @@ sdcc ${VERSION} is now configured for mos6502 ${enable_mos6502_port} mos65c02 ${enable_mos65c02_port} - Disable non-free lib: ${OPT_DISABLE_NON_FREE} Disable packihx: ${OPT_DISABLE_PACKIHX} Disable ucsim: ${OPT_DISABLE_UCSIM} Disable device lib: ${OPT_DISABLE_DEVICE_LIB} @@ -11056,9 +10851,6 @@ sdcc ${VERSION} is now configured for include/library files: ${datadir}/${inclib_dir_suffix} include files: ${datadir}/${include_dir_suffix} library files: ${datadir}/${lib_dir_suffix} - non-free files: ${datadir}/${non_free_inclib_dir_suffix} - non-free include files: ${datadir}/${non_free_include_dir_suffix} - non-free library files: ${datadir}/${non_free_lib_dir_suffix} documentation: ${docdir} prefix: ${prefix} @@ -11070,15 +10862,9 @@ sdcc ${VERSION} is now configured for include files: ${incPath1} path(argv[0])${incPath2} ${incPath3} - ${nonFreeIncPath1} - path(argv[0])${nonFreeIncPath2} - ${nonFreeIncPath3} library files: \$SDCC_HOME${libPath1}${dirch} path(argv[0])${libPath2}${dirch} ${libPath3}${dirch} - \$SDCC_HOME${nonFreeLibPath1}${dirch} - path(argv[0])${nonFreeLibPath2}${dirch} - ${nonFreeLibPath3}${dirch} " >&5 printf "%s\n" " sdcc ${VERSION} is now configured for @@ -11120,7 +10906,6 @@ sdcc ${VERSION} is now configured for mos6502 ${enable_mos6502_port} mos65c02 ${enable_mos65c02_port} - Disable non-free lib: ${OPT_DISABLE_NON_FREE} Disable packihx: ${OPT_DISABLE_PACKIHX} Disable ucsim: ${OPT_DISABLE_UCSIM} Disable device lib: ${OPT_DISABLE_DEVICE_LIB} @@ -11135,9 +10920,6 @@ sdcc ${VERSION} is now configured for include/library files: ${datadir}/${inclib_dir_suffix} include files: ${datadir}/${include_dir_suffix} library files: ${datadir}/${lib_dir_suffix} - non-free files: ${datadir}/${non_free_inclib_dir_suffix} - non-free include files: ${datadir}/${non_free_include_dir_suffix} - non-free library files: ${datadir}/${non_free_lib_dir_suffix} documentation: ${docdir} prefix: ${prefix} @@ -11149,15 +10931,9 @@ sdcc ${VERSION} is now configured for include files: ${incPath1} path(argv[0])${incPath2} ${incPath3} - ${nonFreeIncPath1} - path(argv[0])${nonFreeIncPath2} - ${nonFreeIncPath3} library files: \$SDCC_HOME${libPath1}${dirch} path(argv[0])${libPath2}${dirch} ${libPath3}${dirch} - \$SDCC_HOME${nonFreeLibPath1}${dirch} - path(argv[0])${nonFreeLibPath2}${dirch} - ${nonFreeLibPath3}${dirch} " >&6; } # End of configure/configure.in diff --git a/configure.ac b/configure.ac index cc5309e..5eb4326 100644 --- a/configure.ac +++ b/configure.ac @@ -562,19 +562,6 @@ if test "${include_dir_suffix}" = ""; then include_dir_suffix="${inclib_dir_suffix}/include" fi -AC_ARG_VAR([non_free_inclib_dir_suffix], [appended to datadir to define SDCC's non-free include/lib directory]) -if test "${non_free_inclib_dir_suffix}" = ""; then - non_free_inclib_dir_suffix="sdcc/non-free" -fi - -# non_free_include_dir_suffix: -# *nix default: "sdcc/non-free/include" - -AC_ARG_VAR([non_free_include_dir_suffix], [appended to datadir to define SDCC's non-free include directory]) -if test "${non_free_include_dir_suffix}" = ""; then - non_free_include_dir_suffix="${non_free_inclib_dir_suffix}/include" -fi - # lib_dir_suffix: # *nix default: "sdcc/lib" AC_ARG_VAR([lib_dir_suffix], [appended to datadir to define SDCC's library root directory]) @@ -582,13 +569,6 @@ if test "${lib_dir_suffix}" = ""; then lib_dir_suffix="${inclib_dir_suffix}/lib" fi -# non_free_lib_dir_suffix: -# *nix default: "sdcc/non-free/lib" -AC_ARG_VAR([non_free_lib_dir_suffix], [appended to datadir to define SDCC's non-free library root directory]) -if test "${non_free_lib_dir_suffix}" = ""; then - non_free_lib_dir_suffix="${non_free_inclib_dir_suffix}/lib" -fi - # docdir: # *nix default: "${datadir}/sdcc/doc" AC_ARG_VAR([docdir], [documentation installation directory]) @@ -629,19 +609,11 @@ norm_inc_dir_suffix=${include_dir_suffix} adl_NORMALIZE_PATH([norm_inc_dir_suffix], [$sdccconf_h_dir_separator]) AC_DEFINE_UNQUOTED(INCLUDE_DIR_SUFFIX, DIR_SEPARATOR_STRING "${norm_inc_dir_suffix}", [XXX]) -norm_non_free_inc_dir_suffix=${non_free_include_dir_suffix} -adl_NORMALIZE_PATH([norm_non_free_inc_dir_suffix], [$sdccconf_h_dir_separator]) -AC_DEFINE_UNQUOTED(NON_FREE_INCLUDE_DIR_SUFFIX, - DIR_SEPARATOR_STRING "${norm_non_free_inc_dir_suffix}", [XXX]) norm_lib_dir_suffix=${lib_dir_suffix} adl_NORMALIZE_PATH([norm_lib_dir_suffix], [$sdccconf_h_dir_separator]) AC_DEFINE_UNQUOTED(LIB_DIR_SUFFIX, DIR_SEPARATOR_STRING "${norm_lib_dir_suffix}", [XXX]) -norm_non_free_lib_dir_suffix=${non_free_lib_dir_suffix} -adl_NORMALIZE_PATH([norm_non_free_lib_dir_suffix], [$sdccconf_h_dir_separator]) -AC_DEFINE_UNQUOTED(NON_FREE_LIB_DIR_SUFFIX, - DIR_SEPARATOR_STRING "${norm_non_free_lib_dir_suffix}", [XXX]) # relative paths adl_COMPUTE_RELATIVE_PATHS([expanded_bindir:expanded_datadir:bin2data_dir]) @@ -819,7 +791,6 @@ AC_DO_DISABLER(packihx, PACKIHX, [Disables building packihx]) AC_DO_DISABLER(sdcpp, SDCPP, [Disables building sdcpp]) AC_DO_DISABLER(sdcdb, SDCDB, [Disables building sdcdb]) AC_DO_DISABLER(sdbinutils, SDBINUTILS, [Disables configuring and building of sdbinutils]) -AC_DO_DISABLER(non-free, NON_FREE, [Disables non-free runtime library parts]) AC_DO_ENABLER(doc, DOC, [Enables building the documentation]) AC_CHECK_PROG([LYX], [lyx], [lyx], [:]) @@ -897,16 +868,10 @@ if test $OPT_DISABLE_PIC14 = 0; then AC_CONFIG_FILES(src/pic14/Makefile) test $OPT_DISABLE_DEVICE_LIB = 0 && AC_CONFIG_SUBDIRS(device/lib/pic14) fi -if test $OPT_DISABLE_PIC14 = 0 && test $OPT_DISABLE_NON_FREE = 0; then - test $OPT_DISABLE_DEVICE_LIB = 0 && AC_CONFIG_SUBDIRS(device/non-free/lib/pic14) -fi if test $OPT_DISABLE_PIC16 = 0; then AC_CONFIG_FILES(src/pic16/Makefile) test $OPT_DISABLE_DEVICE_LIB = 0 && AC_CONFIG_SUBDIRS(device/lib/pic16) fi -if test $OPT_DISABLE_PIC16 = 0 && test $OPT_DISABLE_NON_FREE = 0; then - test $OPT_DISABLE_DEVICE_LIB = 0 && AC_CONFIG_SUBDIRS(device/non-free/lib/pic16) -fi if test $OPT_DISABLE_Z80 = 0 || test $OPT_DISABLE_Z180 = 0 || test $OPT_DISABLE_R2K = 0 || test $OPT_DISABLE_R2KA = 0 || test $OPT_DISABLE_R3KA = 0 || test $OPT_DISABLE_SM83 = 0 || test $OPT_DISABLE_TLCS90 = 0 || test $OPT_DISABLE_EZ80_Z80 = 0 || test $OPT_DISABLE_Z80N = 0; then AC_CONFIG_FILES([src/z80/Makefile]) @@ -970,7 +935,6 @@ fi test $OPT_DISABLE_DEVICE_LIB = 0 && AC_CONFIG_FILES([device/lib/Makefile]) -test $OPT_DISABLE_DEVICE_LIB = 0 && test $OPT_DISABLE_NON_FREE = 0 && AC_CONFIG_FILES([device/non-free/lib/Makefile]) AC_CONFIG_FILES([main.mk:main_in.mk src/Makefile @@ -984,9 +948,6 @@ support/regression/ports/host/spec.mk:support/regression/ports/host/spec.mk.in Makefile Makefile.common:Makefile.common.in ]) -if test $OPT_DISABLE_NON_FREE = 0; then - AC_CONFIG_FILES([device/non-free/include/Makefile]) -fi AC_OUTPUT # I found no better place @@ -1004,16 +965,10 @@ adl_NORMALIZE_PATH_MSG(/${prefix2bin_dir}, [binPath], [ adl_NORMALIZE_PATH_MSG(/${prefix2data_dir}/${norm_inc_dir_suffix}, [incPath1], [$dirch]) adl_NORMALIZE_PATH_MSG(/${bin2data_dir}/${norm_inc_dir_suffix}, [incPath2], [$dirch]) adl_NORMALIZE_PATH_MSG(${expanded_datadir}/${norm_inc_dir_suffix}, [incPath3], [$dirch]) -adl_NORMALIZE_PATH_MSG(/${prefix2data_dir}/${norm_non_free_inc_dir_suffix}, [nonFreeIncPath1], [$dirch]) -adl_NORMALIZE_PATH_MSG(/${bin2data_dir}/${norm_non_free_inc_dir_suffix}, [nonFreeIncPath2], [$dirch]) -adl_NORMALIZE_PATH_MSG(${expanded_datadir}/${norm_non_free_inc_dir_suffix}, [nonFreeIncPath3], [$dirch]) adl_NORMALIZE_PATH_MSG(/${prefix2data_dir}/${norm_lib_dir_suffix}, [libPath1], [$dirch]) adl_NORMALIZE_PATH_MSG(/${bin2data_dir}/${norm_lib_dir_suffix}, [libPath2], [$dirch]) adl_NORMALIZE_PATH_MSG(${expanded_datadir}/${norm_lib_dir_suffix}, [libPath3], [$dirch]) -adl_NORMALIZE_PATH_MSG(/${prefix2data_dir}/${norm_non_free_lib_dir_suffix}, [nonFreeLibPath1], [$dirch]) -adl_NORMALIZE_PATH_MSG(/${bin2data_dir}/${norm_non_free_lib_dir_suffix}, [nonFreeLibPath2], [$dirch]) -adl_NORMALIZE_PATH_MSG(${expanded_datadir}/${norm_non_free_lib_dir_suffix}, [nonFreeLibPath3], [$dirch]) AC_MSG_RESULT([ sdcc ${VERSION} is now configured for @@ -1055,7 +1010,6 @@ sdcc ${VERSION} is now configured for mos6502 ${enable_mos6502_port} mos65c02 ${enable_mos65c02_port} - Disable non-free lib: ${OPT_DISABLE_NON_FREE} Disable packihx: ${OPT_DISABLE_PACKIHX} Disable ucsim: ${OPT_DISABLE_UCSIM} Disable device lib: ${OPT_DISABLE_DEVICE_LIB} @@ -1070,9 +1024,6 @@ sdcc ${VERSION} is now configured for include/library files: ${datadir}/${inclib_dir_suffix} include files: ${datadir}/${include_dir_suffix} library files: ${datadir}/${lib_dir_suffix} - non-free files: ${datadir}/${non_free_inclib_dir_suffix} - non-free include files: ${datadir}/${non_free_include_dir_suffix} - non-free library files: ${datadir}/${non_free_lib_dir_suffix} documentation: ${docdir} prefix: ${prefix} @@ -1084,14 +1035,8 @@ sdcc ${VERSION} is now configured for include files: ${incPath1} path(argv[[0]])${incPath2} ${incPath3} - ${nonFreeIncPath1} - path(argv[[0]])${nonFreeIncPath2} - ${nonFreeIncPath3} library files: \$SDCC_HOME${libPath1}${dirch} path(argv[[0]])${libPath2}${dirch} ${libPath3}${dirch} - \$SDCC_HOME${nonFreeLibPath1}${dirch} - path(argv[[0]])${nonFreeLibPath2}${dirch} - ${nonFreeLibPath3}${dirch} ]) # End of configure/configure.in diff --git a/device/lib/pic14/Makefile.common b/device/lib/pic14/Makefile.common index 019fe0f..da3389d 100644 --- a/device/lib/pic14/Makefile.common +++ b/device/lib/pic14/Makefile.common @@ -68,14 +68,14 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR)) AM_CPPFLAGS = AM_CPPFLAGS += -I. AM_CPPFLAGS += -I$(top_srcdir) -AM_CPPFLAGS += -I$(DEVICE_TOP_DIR)/include/pic14 -I$(DEVICE_TOP_DIR)/non-free/include/pic14 -I$(DEVICE_TOP_DIR)/include +AM_CPPFLAGS += -I$(DEVICE_TOP_DIR)/include/pic14 -I$(DEVICE_TOP_DIR)/include ############################################################ # C compiler flags ############################################################ SDCC_FLAGS = -SDCC_FLAGS += -mpic14 --less-pedantic --no-warn-non-free --i-code-in-asm --fverbose-asm +SDCC_FLAGS += -mpic14 --less-pedantic --i-code-in-asm --fverbose-asm SDCC_FLAGS += --std-c11 # extra flags for enhanced cores @@ -113,7 +113,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO AM_CCASFLAGS = AM_CCASFLAGS += -p$(ARCH) AM_CCASFLAGS += -I$(srcdir) -AM_CCASFLAGS += -I$(DEVICE_TOP_DIR)/include/pic14 -I$(DEVICE_TOP_DIR)/non-free/include/pic14 +AM_CCASFLAGS += -I$(DEVICE_TOP_DIR)/include/pic14 ############################################################ # Common actions diff --git a/device/lib/pic14/Makefile.in b/device/lib/pic14/Makefile.in index 039c0cb..90510fd 100644 --- a/device/lib/pic14/Makefile.in +++ b/device/lib/pic14/Makefile.in @@ -335,13 +335,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR)) # C preprocessor flags ############################################################ AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \ -I$(DEVICE_TOP_DIR)/include ############################################################ # C compiler flags ############################################################ -SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \ +SDCC_FLAGS = -mpic14 --less-pedantic \ --i-code-in-asm --fverbose-asm --std-c11 $(am__append_4) # extra flags for enhanced cores @@ -366,8 +365,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO ############################################################ # Assembler flags ############################################################ -AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 +AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 # extensions generated by the build process CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb diff --git a/device/lib/pic14/libc/Makefile.in b/device/lib/pic14/libc/Makefile.in index 1283cbb..70e82d0 100644 --- a/device/lib/pic14/libc/Makefile.in +++ b/device/lib/pic14/libc/Makefile.in @@ -878,13 +878,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR)) # C preprocessor flags ############################################################ AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \ -I$(DEVICE_TOP_DIR)/include ############################################################ # C compiler flags ############################################################ -SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \ +SDCC_FLAGS = -mpic14 --less-pedantic \ --i-code-in-asm --fverbose-asm --std-c11 $(am__append_9) # extra flags for enhanced cores @@ -909,8 +908,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO ############################################################ # Assembler flags ############################################################ -AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 +AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 # extensions generated by the build process CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb diff --git a/device/lib/pic14/libm/Makefile.in b/device/lib/pic14/libm/Makefile.in index 409835d..e9fdef8 100644 --- a/device/lib/pic14/libm/Makefile.in +++ b/device/lib/pic14/libm/Makefile.in @@ -511,13 +511,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR)) # C preprocessor flags ############################################################ AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \ -I$(DEVICE_TOP_DIR)/include ############################################################ # C compiler flags ############################################################ -SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \ +SDCC_FLAGS = -mpic14 --less-pedantic \ --i-code-in-asm --fverbose-asm --std-c11 $(am__append_9) # extra flags for enhanced cores @@ -542,8 +541,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO ############################################################ # Assembler flags ############################################################ -AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 +AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 # extensions generated by the build process CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb diff --git a/device/lib/pic14/libsdcc/enhanced-no-xinst/Makefile.in b/device/lib/pic14/libsdcc/enhanced-no-xinst/Makefile.in index c82f7ba..780fa77 100644 --- a/device/lib/pic14/libsdcc/enhanced-no-xinst/Makefile.in +++ b/device/lib/pic14/libsdcc/enhanced-no-xinst/Makefile.in @@ -518,13 +518,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR)) # C preprocessor flags ############################################################ AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \ -I$(DEVICE_TOP_DIR)/include ############################################################ # C compiler flags ############################################################ -SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \ +SDCC_FLAGS = -mpic14 --less-pedantic \ --i-code-in-asm --fverbose-asm --std-c11 $(am__append_5) # extra flags for enhanced cores @@ -549,8 +548,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO ############################################################ # Assembler flags ############################################################ -AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 +AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 # extensions generated by the build process CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb diff --git a/device/lib/pic14/libsdcc/enhanced/Makefile.in b/device/lib/pic14/libsdcc/enhanced/Makefile.in index 33b8299..f4e0398 100644 --- a/device/lib/pic14/libsdcc/enhanced/Makefile.in +++ b/device/lib/pic14/libsdcc/enhanced/Makefile.in @@ -518,13 +518,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR)) # C preprocessor flags ############################################################ AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \ -I$(DEVICE_TOP_DIR)/include ############################################################ # C compiler flags ############################################################ -SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \ +SDCC_FLAGS = -mpic14 --less-pedantic \ --i-code-in-asm --fverbose-asm --std-c11 $(am__append_5) # extra flags for enhanced cores @@ -549,8 +548,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO ############################################################ # Assembler flags ############################################################ -AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 +AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 # extensions generated by the build process CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb diff --git a/device/lib/pic14/libsdcc/regular/Makefile.in b/device/lib/pic14/libsdcc/regular/Makefile.in index 6586b7d..7010287 100644 --- a/device/lib/pic14/libsdcc/regular/Makefile.in +++ b/device/lib/pic14/libsdcc/regular/Makefile.in @@ -511,13 +511,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR)) # C preprocessor flags ############################################################ AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \ -I$(DEVICE_TOP_DIR)/include ############################################################ # C compiler flags ############################################################ -SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \ +SDCC_FLAGS = -mpic14 --less-pedantic \ --i-code-in-asm --fverbose-asm --std-c11 $(am__append_5) # extra flags for enhanced cores @@ -542,8 +541,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO ############################################################ # Assembler flags ############################################################ -AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \ - -I$(DEVICE_TOP_DIR)/non-free/include/pic14 +AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 # extensions generated by the build process CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb diff --git a/device/lib/pic16/Makefile.common b/device/lib/pic16/Makefile.common index 01ad950..62839b9 100644 --- a/device/lib/pic16/Makefile.common +++ b/device/lib/pic16/Makefile.common @@ -1,11 +1,10 @@ AM_CPPFLAGS = AM_CPPFLAGS += -I. -AM_CPPFLAGS += -I$(top_srcdir)/../../include/pic16 -I$(top_srcdir)/../../non-free/include/pic16 +AM_CPPFLAGS += -I$(top_srcdir)/../../include/pic16 AM_CFLAGS = AM_CFLAGS += --std-c11 AM_CFLAGS += --asm="$(CCAS)" -AM_CFLAGS += --no-warn-non-free ##AM_CFLAGS += -Wa,-q AM_CFLAGS += --fomit-frame-pointer @@ -31,7 +30,7 @@ AM_CFLAGS += --i-code-in-asm AM_CFLAGS += @USE_FLOATS@ AM_CCASFLAGS = -AM_CCASFLAGS += -I$(top_srcdir)/../../include/pic16 -I$(top_srcdir)/../../non-free/include/pic16 +AM_CCASFLAGS += -I$(top_srcdir)/../../include/pic16 AM_CCASFLAGS += -I$(srcdir) clean-local: diff --git a/device/lib/pic16/Makefile.in b/device/lib/pic16/Makefile.in index 6a4c9cf..4b07384 100644 --- a/device/lib/pic16/Makefile.in +++ b/device/lib/pic16/Makefile.in @@ -87,10 +87,7 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = \ - $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \ - $(top_srcdir)/../../non-free/lib/pic16/processors.ac \ - $(top_srcdir)/configure.ac +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ @@ -297,8 +294,7 @@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = debug libc libio libm libsdcc startup -AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \ - -I$(top_srcdir)/../../non-free/include/pic16 +AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 #AM_CFLAGS += --no-optimize-goto #AM_CFLAGS += --debug-ralloc @@ -312,11 +308,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \ #AM_CFLAGS += --noinduction #AM_CFLAGS += --nojtbound #AM_CFLAGS += --noloopreverse -AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \ +AM_CFLAGS = --std-c11 --asm="$(CCAS)" \ --fomit-frame-pointer --obanksel=9 --denable-peeps \ --optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@ -AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \ - -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir) +AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir) DISTCLEANFILES = a.cod a.hex ./.checkdevices/* pics.supported all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive diff --git a/device/lib/pic16/configure b/device/lib/pic16/configure index add51b9..c451a74 100755 --- a/device/lib/pic16/configure +++ b/device/lib/pic16/configure @@ -3828,7 +3828,6 @@ fi -LIBDEV="${srcdir}/../../non-free/lib/pic16/libdev" { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking devices supported by gputils" >&5 printf %s "checking devices supported by gputils... " >&6; } GOOD_PICS=""; @@ -3839,20 +3838,6 @@ N_GOOD=0 N_BAD=0 mkdir -p ".checkdevices"; rm -f "$RESULT"; -for i in "${LIBDEV}/pic1"*.c; do - p="${i##*pic}"; - p="${p%.c}"; - P=$(echo "$p" | tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ); - printf " include \"p%s.inc\"\n END" "$p" > "${CHECK}.asm"; - if "$mCCAS" -p "$p" -o "${CHECK}.o" -c "${CHECK}.asm" >/dev/null 2>&1 && "$mLD" "${CHECK}.o" >/dev/null 2>&1; then - GOOD_PICS="$GOOD_PICS $p"; - N_GOOD=`expr $N_GOOD + 1`; - echo "$P" >> "$RESULT"; - else - BAD_PICS="$BAD_PICS $p"; - N_BAD=`expr $N_BAD + 1`; - fi; -done; { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $N_GOOD devices ($GOOD_PICS)" >&5 printf "%s\n" "$N_GOOD devices ($GOOD_PICS)" >&6; } diff --git a/device/lib/pic16/configure.ac b/device/lib/pic16/configure.ac index 75bea9d..65e98be 100644 --- a/device/lib/pic16/configure.ac +++ b/device/lib/pic16/configure.ac @@ -68,10 +68,6 @@ AC_SUBST(OBJEXT, [o]) _AM_DEPENDENCIES(CC) _AM_DEPENDENCIES(CCAS) -LIBDEV="${srcdir}/../../non-free/lib/pic16/libdev" -m4_include([../../non-free/lib/pic16/supported-devices.ac]) -m4_include([../../non-free/lib/pic16/processors.ac]) - # Checks for libraries. # Checks for header files. diff --git a/device/lib/pic16/debug/Makefile.in b/device/lib/pic16/debug/Makefile.in index 05108a8..a6a94bb 100644 --- a/device/lib/pic16/debug/Makefile.in +++ b/device/lib/pic16/debug/Makefile.in @@ -88,10 +88,7 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = debug ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = \ - $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \ - $(top_srcdir)/../../non-free/lib/pic16/processors.ac \ - $(top_srcdir)/configure.ac +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) @@ -292,8 +289,7 @@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ lib_LIBRARIES = libdebug.a libdebug_a_SOURCES = gstack/gstack.c -AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \ - -I$(top_srcdir)/../../non-free/include/pic16 +AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 #AM_CFLAGS += --no-optimize-goto #AM_CFLAGS += --debug-ralloc @@ -307,11 +303,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \ #AM_CFLAGS += --noinduction #AM_CFLAGS += --nojtbound #AM_CFLAGS += --noloopreverse -AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \ +AM_CFLAGS = --std-c11 --asm="$(CCAS)" \ --fomit-frame-pointer --obanksel=9 --denable-peeps \ --optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@ -AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \ - -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir) +AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir) all: all-am .SUFFIXES: diff --git a/device/lib/pic16/libc/Makefile.in b/device/lib/pic16/libc/Makefile.in index 49a437d..5579b71 100644 --- a/device/lib/pic16/libc/Makefile.in +++ b/device/lib/pic16/libc/Makefile.in @@ -88,10 +88,7 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = libc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = \ - $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \ - $(top_srcdir)/../../non-free/lib/pic16/processors.ac \ - $(top_srcdir)/configure.ac +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) @@ -382,8 +379,7 @@ libc18f_a_SOURCES = ctype/iscntrl.c ctype/isdigit.c ctype/isgraph.c \ string/strpbrk.c string/strrchr.c string/strspn.c \ string/strstr.c string/strtok.c string/strupr.c \ utils/cnvfrac.S utils/cnvint.S utils/cvtdec.S -AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \ - -I$(top_srcdir)/../../non-free/include/pic16 +AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 #AM_CFLAGS += --no-optimize-goto #AM_CFLAGS += --debug-ralloc @@ -397,11 +393,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \ #AM_CFLAGS += --noinduction #AM_CFLAGS += --nojtbound #AM_CFLAGS += --noloopreverse -AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \ +AM_CFLAGS = --std-c11 --asm="$(CCAS)" \ --fomit-frame-pointer --obanksel=9 --denable-peeps \ --optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@ -AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \ - -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir) +AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir) all: all-am .SUFFIXES: diff --git a/device/lib/pic16/libio/Makefile.in b/device/lib/pic16/libio/Makefile.in index 5b1a9b0..664958f 100644 --- a/device/lib/pic16/libio/Makefile.in +++ b/device/lib/pic16/libio/Makefile.in @@ -481,10 +481,7 @@ POST_UNINSTALL = : @ENABLE_18LF8723_TRUE@am__append_393 = libio18lf8723.a subdir = libio ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = \ - $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \ - $(top_srcdir)/../../non-free/lib/pic16/processors.ac \ - $(top_srcdir)/configure.ac +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) @@ -15601,8 +15598,7 @@ libio18lf8722_a_SOURCES = dummy.c i2c/i2cack.c i2c/i2cclose.c \ libio18lf8722_a_CFLAGS = -p18lf8722 $(AM_CFLAGS) libio18lf8723_a_SOURCES = dummy.c libio18lf8723_a_CFLAGS = -p18lf8723 $(AM_CFLAGS) -AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \ - -I$(top_srcdir)/../../non-free/include/pic16 +AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 #AM_CFLAGS += --no-optimize-goto #AM_CFLAGS += --debug-ralloc @@ -15616,11 +15612,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \ #AM_CFLAGS += --noinduction #AM_CFLAGS += --nojtbound #AM_CFLAGS += --noloopreverse -AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \ +AM_CFLAGS = --std-c11 --asm="$(CCAS)" \ --fomit-frame-pointer --obanksel=9 --denable-peeps \ --optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@ -AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \ - -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir) +AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir) all: all-am .SUFFIXES: diff --git a/device/lib/pic16/libio/mkmk.sh b/device/lib/pic16/libio/mkmk.sh index 211604e..e8896bf 100755 --- a/device/lib/pic16/libio/mkmk.sh +++ b/device/lib/pic16/libio/mkmk.sh @@ -17,40 +17,6 @@ lib_LIBRARIES = HEREDOC -for f in "../../../non-free/lib/pic16/libdev/pic1"*.c; do - p="${f##*/pic}"; - p="${p%.c}"; - P=$(echo "$p" | tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ); - echo "Generating for device >>${p}<<" >&2; - cat < /dev/null 2>&1 && { echo "No adc." >&2 ; } || cat < /dev/null 2>&1 && { echo "No i2c." >&2 ; } || cat < /dev/null 2>&1 && { echo "No usart." >&2 ; } || cat < + @@ -3765,68 +3692,6 @@ sdcc/include include \end_layout -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout - -\emph on -NON_FREE_INCLUDE_DIR_SUFFIX -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -sdcc/non-free/include -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -non-free/include -\end_layout - -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout - -\emph on -LIB_DIR_SUFFIX -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -sdcc/lib -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -lib -\end_layout - \end_inset @@ -3837,7 +3702,7 @@ lib \begin_layout Plain Layout \emph on -NON_FREE_LIB_DIR_SUFFIX +LIB_DIR_SUFFIX \end_layout \end_inset @@ -3846,7 +3711,7 @@ NON_FREE_LIB_DIR_SUFFIX \begin_inset Text \begin_layout Plain Layout -sdcc/non-free/lib +sdcc/lib \end_layout \end_inset @@ -3855,7 +3720,7 @@ sdcc/non-free/lib \begin_inset Text \begin_layout Plain Layout -non-free/lib +lib \end_layout \end_inset @@ -4254,20 +4119,6 @@ include \end_inset -\backslash - -\begin_inset Newline newline -\end_inset - -non_free_include_dir_suffix= -\begin_inset Quotes srd -\end_inset - -non-free/include -\begin_inset Quotes srd -\end_inset - - \backslash \begin_inset Newline newline @@ -4282,20 +4133,6 @@ lib \end_inset -\backslash - -\begin_inset Newline newline -\end_inset - -non_free_lib_dir_suffix= -\begin_inset Quotes srd -\end_inset - -non-free/lib -\begin_inset Quotes srd -\end_inset - - \backslash \begin_inset Newline newline @@ -4476,20 +4313,6 @@ include \end_inset -\backslash - -\begin_inset Newline newline -\end_inset - -non_free_include_dir_suffix= -\begin_inset Quotes srd -\end_inset - -non-free/include -\begin_inset Quotes srd -\end_inset - - \backslash \begin_inset Newline newline @@ -4504,20 +4327,6 @@ lib \end_inset -\backslash - -\begin_inset Newline newline -\end_inset - -non_free_lib_dir_suffix= -\begin_inset Quotes srd -\end_inset - -non-free/lib -\begin_inset Quotes srd -\end_inset - - \backslash \begin_inset Newline newline @@ -4614,7 +4423,7 @@ Install paths \begin_layout Standard \align center \begin_inset Tabular - + @@ -4770,64 +4579,6 @@ include \begin_inset Text -\begin_layout Plain Layout -Non-free include files -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout - -\emph on -$DATADIR/non-free/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -$INCLUDE_DIR_SUFFIX -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -/usr/local/share/ -\begin_inset Newline newline -\end_inset - -sdcc/non-free/include -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout - -\backslash -sdcc -\backslash -non-free -\backslash -include -\end_layout - -\end_inset - - - - -\begin_inset Text - \begin_layout Plain Layout Library file** \end_layout @@ -4877,64 +4628,6 @@ sdcc lib \end_layout -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout -Library file** -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout - -\emph on -$DATADIR/non-free/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -$LIB_DIR_SUFFIX -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -/usr/local/share/ -\begin_inset Newline newline -\end_inset - -sdcc/non-free/lib -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout - -\backslash -sdcc -\backslash -non-free -\backslash -lib -\end_layout - \end_inset @@ -5257,7 +4950,7 @@ $PATH \begin_layout Standard \align center \begin_inset Tabular - + @@ -5535,203 +5228,13 @@ include - + \begin_inset Text \begin_layout Plain Layout 5 \end_layout -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout - -\emph on -$DATADIR/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -$INCLUDE_DIR_SUFFIX -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -/usr/local/share/ -\begin_inset Newline newline -\end_inset - -sdcc/include -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -(not on Win32) -\end_layout - -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout -6 -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -$SDCC_HOME/ -\begin_inset Newline newline -\end_inset - - -\emph on -$PREFIX2DATA_DIR/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -non-free/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -$INCLUDE_DIR_SUFFIX -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -$SDCC_HOME/share/ -\begin_inset Newline newline -\end_inset - -sdcc/non-free/include -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -$SDCC_HOME -\backslash -non-free -\backslash -include -\end_layout - -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout -7 -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -path(argv[0])/ -\begin_inset Newline newline -\end_inset - - -\emph on -$BIN2DATADIR/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -non-free/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -$INCLUDE_DIR_SUFFIX -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -path(argv[0])/../ -\begin_inset Newline newline -\end_inset - -sdcc/non-free/include -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -path(argv[0]) -\backslash -.. -\backslash -non-free -\backslash -include -\end_layout - -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout -8 -\end_layout - \end_inset @@ -5747,21 +5250,13 @@ $DATADIR/ \end_inset -\emph on -non-free/ -\emph default - -\begin_inset Newline newline -\end_inset - - \emph on $INCLUDE_DIR_SUFFIX \end_layout \end_inset - + \begin_inset Text \begin_layout Plain Layout @@ -5769,7 +5264,7 @@ $INCLUDE_DIR_SUFFIX \begin_inset Newline newline \end_inset -sdcc/non-free/include +sdcc/include \end_layout \end_inset @@ -5867,7 +5362,7 @@ model \begin_layout Standard \align center \begin_inset Tabular - + @@ -6147,7 +5642,7 @@ lib - + \begin_inset Text \begin_layout Plain Layout @@ -6156,7 +5651,7 @@ lib \end_inset - + \begin_inset Text \begin_layout Plain Layout @@ -6187,7 +5682,7 @@ $LIB_DIR_SUFFIX/ \end_inset - + \begin_inset Text \begin_layout Plain Layout @@ -6202,7 +5697,7 @@ lib/ \end_inset - + \begin_inset Text \begin_layout Plain Layout @@ -6225,308 +5720,6 @@ lib \end_layout -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout -6 -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout - -\emph on -$DATADIR/non-free/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -$LIB_DIR_SUFFIX/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on - -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -/usr/local/share/sdcc/ -\begin_inset Newline newline -\end_inset - -lib/ -\emph on - -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -(not on Win32) -\end_layout - -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout -7 -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -$SDCC_HOME/ -\begin_inset Newline newline -\end_inset - - -\emph on -$PREFIX2DATA_DIR/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -non-free/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -$LIB_DIR_SUFFIX/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on - -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -$SDCC_HOME/share/sdcc/ -\begin_inset Newline newline -\end_inset - -non-free/lib/ -\emph on - -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -$SDCC_HOME -\backslash - -\begin_inset Newline newline -\end_inset - -lib -\backslash -non-free -\emph on - -\backslash - -\end_layout - -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout -8 -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -path(argv[0])/ -\begin_inset Newline newline -\end_inset - - -\emph on -$BIN2DATADIR/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -non-free/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -$LIB_DIR_SUFFIX/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on - -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -path(argv[0])/../sdcc/ -\begin_inset Newline newline -\end_inset - -non-free/lib/ -\emph on - -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -path(argv[0]) -\backslash -.. -\backslash - -\begin_inset Newline newline -\end_inset - -lib -\backslash -non-free -\emph on - -\backslash - -\end_layout - -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout -9 -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout - -\emph on -$DATADIR/non-free/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on -$LIB_DIR_SUFFIX/ -\emph default - -\begin_inset Newline newline -\end_inset - - -\emph on - -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -/usr/local/share/sdcc/ -\begin_inset Newline newline -\end_inset - -non-free/lib/ -\begin_inset Newline newline -\end_inset - - -\emph on - -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -(not on Win32) -\end_layout - \end_inset @@ -8801,14 +7994,6 @@ In /share/sdcc/include the include files \end_layout -\begin_layout Standard -In /share/sdcc/non-free/include -\end_layout - -\begin_layout Itemize -the non-free include files -\end_layout - \begin_layout Standard In /share/sdcc/lib \end_layout @@ -8817,14 +8002,6 @@ In /share/sdcc/lib the src and target subdirectories with the precompiled relocatables. \end_layout -\begin_layout Standard -In /share/sdcc/non-free/lib -\end_layout - -\begin_layout Itemize -the src and target subdirectories with the non-free precompiled relocatables. -\end_layout - \begin_layout Standard In /share/sdcc/doc \end_layout @@ -15590,66 +14767,6 @@ splint myprogram.c \end_layout -\begin_layout Labeling -\labelwidthstring 00.00.0000 - -\series bold -- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\series default - -\begin_inset Index idx -status collapsed - -\begin_layout Plain Layout -- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\end_layout - -\end_inset - - -\begin_inset CommandInset label -LatexCommand label -name "lyx:--use-non-free" - -\end_inset - - Search / include non-free licensed libraries and header files, located - under the non-free directory - see section -\begin_inset CommandInset ref -LatexCommand ref -reference "subsec:Search-Paths" - -\end_inset - - -\end_layout - \begin_layout Subsection Linker Options \begin_inset Index idx @@ -45248,66 +44365,9 @@ http://sourceforge.net/projects/gputils Pic device specific header and c source files are automatically generated from MPLAB include files, which are published by Microchip with a special requirement that they are only to be used with authentic Microchip devices. - This reqirement prevents to publish generated header and c source files - under the GPL compatible license, so they are located in non-free directory - (see section -\begin_inset CommandInset ref -LatexCommand ref -reference "subsec:Search-Paths" - -\end_inset - -). - In order to include them in include and library search paths, the -\series bold -- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\begin_inset Index idx -status collapsed - -\begin_layout Plain Layout -- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\end_layout - -\end_inset - - -\series default - command line option should be defined. -\begin_inset Newline newline -\end_inset - - -\begin_inset Newline newline -\end_inset - -NOTE: the compiled code, which use non-free pic device specific libraries, - is not GPL compatible! + As this restriction is incompatible with the goal of software freedom, + header files and libraries generated from these files are not included + in the SDCC package distributed with Guix. \begin_inset Newline newline \end_inset @@ -45361,7 +44421,7 @@ Makefile \begin_inset space ~ \end_inset -sdcc -V --use-non-free -mpic14 -p16f877 -c $< +sdcc -V -mpic14 -p16f877 -c $< \begin_inset Newline newline \end_inset @@ -45455,7 +44515,7 @@ Makefile \begin_inset space ~ \end_inset -sdcc -S -V --use-non-free -mpic14 -p16f877 $< +sdcc -S -V -mpic14 -p16f877 $< \begin_inset Newline newline \end_inset @@ -45737,47 +44797,6 @@ status collapsed \begin_layout Plain Layout -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\begin_inset Index idx -status collapsed - -\begin_layout Plain Layout -PIC14!Options!- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\end_layout - -\end_inset - - make non-free device headers and libraries available in the compiler's - search paths (implicit -I and -L options) -\end_layout - -\begin_layout Description -- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - \backslash / \end_layout @@ -46650,47 +45669,6 @@ status collapsed -all-callee-saves \end_layout -\begin_layout Description -- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\begin_inset Index idx -status collapsed - -\begin_layout Plain Layout -PIC16!Options!- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\end_layout - -\end_inset - - Make non-free device headers and libraries available in the compiler's - search paths (implicit -I and -L options). -\end_layout - \begin_layout Subsection Port Specific Options \begin_inset Index idx @@ -47967,188 +46945,6 @@ Linker \end_inset -\end_layout - -\begin_layout Standard -If the -\series bold -- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\begin_inset Index idx -status collapsed - -\begin_layout Plain Layout -- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\end_layout - -\end_inset - - -\series default - command line option is specified, non-free directories are searched: -\begin_inset Newline newline -\end_inset - - -\begin_inset Separator latexpar -\end_inset - - -\end_layout - -\begin_layout Standard -\align center -\begin_inset Tabular - - - - - - - - -\begin_inset Text - -\begin_layout Plain Layout -Directory -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -Description -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -Target -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -Command prefix -\end_layout - -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout -PREFIX/sdcc/non-free/include/pic16 -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -PIC16 specific non-free headers -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -Compiler -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout --I -\end_layout - -\end_inset - - - - -\begin_inset Text - -\begin_layout Plain Layout -PREFIX/sdcc/non-free/lib/pic16 -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -PIC16 specific non-free libraries -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout -Linker -\end_layout - -\end_inset - - -\begin_inset Text - -\begin_layout Plain Layout --L -\end_layout - -\end_inset - - - - -\end_inset - - \end_layout \begin_layout Subsection @@ -48844,66 +47640,9 @@ name "subsec:PIC16_Header-Files-and-Libraries" Pic device specific header and c source files are automatically generated from MPLAB include files, which are published by Microchip with a special requirement that they are only to be used with authentic Microchip devices. - This requirement prevents to publish generated header and c source files - under the GPL compatible license, so they are located in the non-free directory - (see section -\begin_inset CommandInset ref -LatexCommand ref -reference "subsec:Search-Paths" - -\end_inset - -). - In order to include them in include and library search paths, the -\series bold -- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\begin_inset Index idx -status collapsed - -\begin_layout Plain Layout -- -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -/ -\end_layout - -\end_inset - --use-non-free -\end_layout - -\end_inset - - -\series default - command line option should be defined. -\begin_inset Newline newline -\end_inset - - -\begin_inset Newline newline -\end_inset - -NOTE: the compiled code, which use non-free pic device specific libraries, - is not GPL compatible! + As this restriction is incompatible with the goal of software freedom, + header files and libraries generated from these files are not included + in the SDCC package distributed with Guix. \end_layout \begin_layout Subsection @@ -49149,195 +47888,6 @@ vfprintf.c should also work, but is untested. \end_layout -\begin_layout Subsection -Adding New Devices to the Port -\end_layout - -\begin_layout Standard -Adding support for a new 16 -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash -, -\end_layout - -\end_inset - -bit PIC MCU requires the following steps: -\end_layout - -\begin_layout Enumerate -Create picDEVICE.c and picDEVICE.h from pDEVICE.inc using -\begin_inset Newline newline -\end_inset - - -\family typewriter -perl /path/to/sdcc/support/scripts/inc2h-pic16.pl -\backslash - -\begin_inset Newline newline -\end_inset - -/path/to/gputils/header/pDEVICE.inc -\end_layout - -\begin_layout Enumerate - -\family typewriter -mv picDEVICE.h /path/to/sdcc/device/non-free/include/pic16 -\end_layout - -\begin_layout Enumerate - -\family typewriter -mv picDEVICE.c /path/to/sdcc/device/non-free/lib/pic16/libdev -\end_layout - -\begin_layout Enumerate -Either -\begin_inset Separator latexpar -\end_inset - - -\end_layout - -\begin_deeper -\begin_layout Enumerate -add the new device to -\family typewriter -/path/to/sdcc/device/lib/pic16/libio/*.ignore -\family default - to suppress building any of the I/O libraries for the new device -\begin_inset Foot -status collapsed - -\begin_layout Plain Layout -In fact, the -\family typewriter -.ignore -\family default - files are only used when auto-generating -\family typewriter -Makefile.am -\family default - using the -\family typewriter -.../libio/mkmk.sh -\family default - script. -\end_layout - -\end_inset - -, or -\end_layout - -\begin_layout Enumerate -add the device (family) to -\family typewriter -/path/to/sdcc/support/scripts/pic18fam-h-gen.pl -\family default - to assign I/O styles, run the -\family typewriter -pic18fam-h-gen.pl -\family default - script to generate -\family typewriter -pic18fam.h.gen -\family default -, replace your existing -\family typewriter -pic18fam.h -\family default - with the generated file, and (if required) implement new I/O styles in - -\family typewriter -/path/to/sdcc/device/include/pic16/{adc,i2c,usart}.h -\family default - and -\family typewriter -/path/to/sdcc/device/lib/pic16/libio/*/*. -\end_layout - -\end_deeper -\begin_layout Enumerate -Edit -\family typewriter -/path/to/sdcc/device/include/pic16/pic18fregs.h -\family default - -\begin_inset Newline newline -\end_inset - -The file format is self-explanatory, just add -\begin_inset Newline newline -\end_inset - - -\family typewriter -#elif defined(picDEVICE) -\begin_inset Newline newline -\end_inset - -# -\begin_inset ERT -status collapsed - -\begin_layout Plain Layout - - -\backslash - -\backslash - -\end_layout - -\end_inset - -include -\family default - -\begin_inset Newline newline -\end_inset - -at the right place (keep the file sorted, please). -\end_layout - -\begin_layout Enumerate -Edit -\family typewriter -/path/to/sdcc/device/include/pic16devices.txt -\begin_inset Newline newline -\end_inset - - -\family default -Copy and modify an existing entry or create a new one and insert it at the - correct place (keep the file sorted, please). -\end_layout - -\begin_layout Enumerate - -\family typewriter -( cd /path/to/sdcc/device/non-free/lib/pic16 && sh update.sh ) -\end_layout - -\begin_layout Enumerate -Recompile the pic16 libraries as described in -\begin_inset CommandInset ref -LatexCommand ref -reference "subsec:pic16Libraries" - -\end_inset - - or just configure and build sdcc again from scratch (recommended). -\end_layout - \begin_layout Subsection Memory Models \end_layout @@ -74082,6 +72632,12 @@ This document was initially written by Sandeep Dutta and updated by SDCC developers. \end_layout +\begin_layout Standard +It has been modified from the original to reflect the removal of non-free + components and related functionality in the SDCC package distributed with + GNU Guix. +\end_layout + \begin_layout Standard All product names mentioned herein may be trademarks \begin_inset Index idx diff --git a/sdcc.spec b/sdcc.spec index 85ae200..8e0ef4b 100644 --- a/sdcc.spec +++ b/sdcc.spec @@ -89,9 +89,7 @@ rm -rf $RPM_BUILD_ROOT %files common %defattr(-,root,root) /usr/share/sdcc/include -/usr/share/sdcc/non-free/include /usr/share/sdcc/lib -/usr/share/sdcc/non-free/lib %files doc %defattr(-,root,root) @@ -102,6 +100,8 @@ rm -rf $RPM_BUILD_ROOT - version updated to 4.2.0 * Sat Feb 20 2021 - pkk AT spth.de - version updated to 4.0.0 +* Tue Dec 08 2020 - simon AT simonsouth.net +- removed non-free include and lib directories * Sat Jan 18 2020 - pkk AT spth.de - version updated to 4.0.0 * Fri Apr 05 2019 - krauseph AT informatik.uni-freiburg.de diff --git a/sdcc_vc.h.in b/sdcc_vc.h.in index 8cf401b..19f5113 100644 --- a/sdcc_vc.h.in +++ b/sdcc_vc.h.in @@ -23,8 +23,6 @@ #define INCLUDE_DIR_SUFFIX "\\include" #define LIB_DIR_SUFFIX "\\lib" -#define NON_FREE_INCLUDE_DIR_SUFFIX "\\non-free\\include" -#define NON_FREE_LIB_DIR_SUFFIX "\\non-free\\lib" #define BIN2DATA_DIR "\\.." #define PREFIX2BIN_DIR "\\bin" diff --git a/sdccconf_in.h b/sdccconf_in.h index ca8d69f..980af8d 100644 --- a/sdccconf_in.h +++ b/sdccconf_in.h @@ -100,12 +100,6 @@ /* XXX */ #undef LIB_DIR_SUFFIX -/* XXX */ -#undef NON_FREE_INCLUDE_DIR_SUFFIX - -/* XXX */ -#undef NON_FREE_LIB_DIR_SUFFIX - /* Define to 1 to disable the AVR port */ #undef OPT_DISABLE_AVR @@ -133,9 +127,6 @@ /* XXX */ #undef OPT_DISABLE_MOS65C02 -/* XXX */ -#undef OPT_DISABLE_NON_FREE - /* XXX */ #undef OPT_DISABLE_PACKIHX diff --git a/src/SDCCglobl.h b/src/SDCCglobl.h index b49fa1b..d357169 100644 --- a/src/SDCCglobl.h +++ b/src/SDCCglobl.h @@ -287,7 +287,6 @@ struct options int stack_size; /* MCS51/DS390 - Tells the linker to allocate this space for stack */ int acall_ajmp; /* MCS51 - Use acall/ajmp instead of lcall/ljmp */ int no_ret_without_call; /* MCS51 - Do not use ret independent of acall/lcall */ - int use_non_free; /* Search / include non-free licensed libraries and header files */ /* starting address of the segments */ int xstack_loc; /* initial location of external stack */ int stack_loc; /* initial value of internal stack pointer */ diff --git a/src/SDCCmain.c b/src/SDCCmain.c index bc1493d..e775988 100644 --- a/src/SDCCmain.c +++ b/src/SDCCmain.c @@ -151,7 +151,6 @@ char buffer[PATH_MAX * 2]; #define OPTION_DATA_SEG "--dataseg" #define OPTION_DOLLARS_IN_IDENT "--fdollars-in-identifiers" #define OPTION_SIGNED_CHAR "--fsigned-char" -#define OPTION_USE_NON_FREE "--use-non-free" #define OPTION_PEEP_RETURN "--peep-return" #define OPTION_NO_PEEP_RETURN "--no-peep-return" #define OPTION_NO_OPTSDCC_IN_ASM "--no-optsdcc-in-asm" @@ -209,7 +208,6 @@ static const OPTION optionsTable[] = { {0, OPTION_STD_SDCC2X, NULL, "Use ISO C2X standard with SDCC extensions"}, {0, OPTION_DOLLARS_IN_IDENT, &options.dollars_in_ident, "Permit '$' as an identifier character"}, {0, OPTION_SIGNED_CHAR, &options.signed_char, "Make \"char\" signed by default"}, - {0, OPTION_USE_NON_FREE, &options.use_non_free, "Search / include non-free licensed libraries and header files"}, {0, NULL, NULL, "Code generation options"}, {'m', NULL, NULL, "Set the port to use e.g. -mz80."}, @@ -2132,10 +2130,6 @@ preProcess (char **envp) else addSet (&preArgvSet, Safe_strdup ("-D__SDCC_CHAR_UNSIGNED")); - /* set the macro for non-free */ - if (options.use_non_free) - addSet (&preArgvSet, Safe_strdup ("-D__SDCC_USE_NON_FREE")); - /* set the macro for large model */ switch (options.model) { @@ -2365,12 +2359,6 @@ setIncludePath (void) * 6. - $SDCC_HOME/PREFIX2DATA_DIR/INCLUDE_DIR_SUFFIX * 7. - path(argv[0])/BIN2DATA_DIR/INCLUDE_DIR_SUFFIX * 8. - DATADIR/INCLUDE_DIR_SUFFIX (only on *nix) - * 9. - $SDCC_HOME/PREFIX2DATA_DIR/NON_FREE_INCLUDE_DIR_SUFFIX/target - * 10. - path(argv[0])/BIN2DATA_DIR/NON_FREE_INCLUDE_DIR_SUFFIX/target - * 11. - DATADIR/NON_FREE_INCLUDE_DIR_SUFFIX/target (only on *nix) - * 12. - $SDCC_HOME/PREFIX2DATA_DIR/NON_FREE_INCLUDE_DIR_SUFFIX - * 13. - path(argv[0])/BIN2DATA_DIR/NON_FREE_INCLUDE_DIR_SUFFIX - * 14. - DATADIR/NON_FREE_INCLUDE_DIR_SUFFIX (only on *nix) */ if (!options.nostdinc) @@ -2386,17 +2374,6 @@ setIncludePath (void) includeDirsSet = processStrSet (includeDirsSet, NULL, port->target, NULL); mergeSets (&includeDirsSet, tempSet); - if (options.use_non_free) - { - set *tempSet1; - - tempSet = processStrSet (dataDirsSet, NULL, NON_FREE_INCLUDE_DIR_SUFFIX, NULL); - tempSet1 = processStrSet (tempSet, NULL, DIR_SEPARATOR_STRING, NULL); - tempSet1 = processStrSet (tempSet1, NULL, port->target, NULL); - mergeSets (&tempSet1, tempSet); - mergeSets (&includeDirsSet, tempSet1); - } - if ((p = getenv (SDCC_INCLUDE_NAME)) != NULL) { struct dbuf_s dbuf; @@ -2421,9 +2398,6 @@ setLibPath (void) * 3. - $SDCC_HOME/PREFIX2DATA_DIR/LIB_DIR_SUFFIX/ * 4. - path(argv[0])/BIN2DATA_DIR/LIB_DIR_SUFFIX/ * 5. - DATADIR/LIB_DIR_SUFFIX/ (only on *nix) - * 6. - $SDCC_HOME/PREFIX2DATA_DIR/NON_FREE_LIB_DIR_SUFFIX/ - * 7. - path(argv[0])/BIN2DATA_DIR/NON_FREE_LIB_DIR_SUFFIX/ - * 8. - DATADIR/NON_FREE_LIB_DIR_SUFFIX/ (only on *nix) */ if (!options.nostdlib) @@ -2440,13 +2414,6 @@ setLibPath (void) dbuf_makePath (&dbuf, LIB_DIR_SUFFIX, port->general.get_model ? port->general.get_model () : targetname); libDirsSet = processStrSet (dataDirsSet, NULL, dbuf_c_str (&dbuf), NULL); - if (options.use_non_free) - { - dbuf_set_length (&dbuf, 0); - dbuf_makePath (&dbuf, NON_FREE_LIB_DIR_SUFFIX, port->general.get_model ? port->general.get_model () : targetname); - mergeSets (&libDirsSet, processStrSet (dataDirsSet, NULL, dbuf_c_str (&dbuf), NULL)); - } - if ((p = getenv (SDCC_LIB_NAME)) != NULL) { addSetHead (&libDirsSet, Safe_strdup (p)); diff --git a/src/pic14/main.c b/src/pic14/main.c index 38d8730..a0eecdb 100644 --- a/src/pic14/main.c +++ b/src/pic14/main.c @@ -42,7 +42,6 @@ static OPTION _pic14_poptions[] = { 0, "--no-pcode-opt", &pic14_options.disable_df, "disable (slightly faulty) optimization on pCode" }, { 0, OPTION_STACK_SIZE, &options.stack_size, "sets the size if the argument passing stack (default: 16, minimum: 4)", CLAT_INTEGER }, { 0, "--no-extended-instructions", &pic14_options.no_ext_instr, "forbid use of the extended instruction set (e.g., ADDFSR)" }, - { 0, "--no-warn-non-free", &pic14_options.no_warn_non_free, "suppress warning on absent --use-non-free option" }, { 0, NULL, NULL, NULL } }; @@ -180,16 +179,6 @@ _pic14_finaliseOptions (void) addSet (&preArgvSet, Safe_strdup (dbuf_detach_c_str (&dbuf))); } - if (!pic14_options.no_warn_non_free && !options.use_non_free) - { - fprintf(stderr, - "WARNING: Command line option --use-non-free not present.\n" - " When compiling for PIC14/PIC16, please provide --use-non-free\n" - " to get access to device headers and libraries.\n" - " If you do not use these, you may provide --no-warn-non-free\n" - " to suppress this warning (not recommended).\n"); - } // if - } static void diff --git a/src/pic14/main.h b/src/pic14/main.h index 4275b65..0dc8c86 100644 --- a/src/pic14/main.h +++ b/src/pic14/main.h @@ -5,7 +5,6 @@ typedef struct { unsigned int isLibrarySource:1; int disable_df; int no_ext_instr; - int no_warn_non_free; } pic14_options_t; extern pic14_options_t pic14_options; diff --git a/src/pic16/device.h b/src/pic16/device.h index cdfbba0..5877f09 100644 --- a/src/pic16/device.h +++ b/src/pic16/device.h @@ -99,7 +99,6 @@ typedef struct { int gstack; unsigned int debgen; int xinst; - int no_warn_non_free; } pic16_options_t; extern pic16_options_t pic16_options; diff --git a/src/pic16/main.c b/src/pic16/main.c index b0e717a..d7616f5 100644 --- a/src/pic16/main.c +++ b/src/pic16/main.c @@ -660,7 +660,6 @@ OPTION pic16_optionsTable[]= { { 0, "--pcode-verbose", &pic16_pcode_verbose, "dump pcode related info"}, { 0, "--calltree", &pic16_options.dumpcalltree, "dump call tree in .calltree file"}, { 0, "--gstack", &pic16_options.gstack, "trace stack pointer push/pop to overflow"}, - { 0, "--no-warn-non-free", &pic16_options.no_warn_non_free, "suppress warning on absent --use-non-free option" }, { 0, NULL, NULL, NULL} }; @@ -945,16 +944,6 @@ _pic16_finaliseOptions (void) addSet (&asmOptionsSet, Safe_strdup ("-D__STACK_MODEL_SMALL")); } - if (!pic16_options.no_warn_non_free && !options.use_non_free) - { - fprintf(stderr, - "WARNING: Command line option --use-non-free not present.\n" - " When compiling for PIC14/PIC16, please provide --use-non-free\n" - " to get access to device headers and libraries.\n" - " If you do not use these, you may provide --no-warn-non-free\n" - " to suppress this warning (not recommended).\n"); - } // if - dbuf_destroy (&dbuf); } @@ -984,7 +973,6 @@ _pic16_setDefaultOptions (void) pic16_options.ip_stack = 1; /* set to 1 to enable ipop/ipush for stack */ pic16_options.gstack = 0; pic16_options.debgen = 0; - pic16_options.no_warn_non_free = 0; } static const char * diff --git a/src/regression/Makefile b/src/regression/Makefile index d8dae7c..1a32355 100644 --- a/src/regression/Makefile +++ b/src/regression/Makefile @@ -107,12 +107,12 @@ endif CC = $(top_builddir)/bin/sdcc # compiler options -CFLAGS = --no-warn-non-free -m$(ARCH) -p$(DEV) --fsigned-char --i-code-in-asm --fverbose-asm --std-c99 -CFLAGS += --nostdinc -I$(top_srcdir)/device/include/$(ARCH) -I$(top_srcdir)/device/non-free/include/$(ARCH) -I$(top_srcdir)/device/include +CFLAGS = -m$(ARCH) -p$(DEV) --fsigned-char --i-code-in-asm --fverbose-asm --std-c99 +CFLAGS += --nostdinc -I$(top_srcdir)/device/include/$(ARCH) -I$(top_srcdir)/device/include # linker options (for sdcc) CFLAGS += -Wl,-l,-O2 -CFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/$(ARCH) -L$(top_builddir)/device/non-free/lib/build/$(ARCH) +CFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/$(ARCH) # linker libraries LIB_SUFFIX = $(LIB_E)$(LIB_O)$(LIB_X) diff --git a/support/regression/ports/pic14/spec.mk b/support/regression/ports/pic14/spec.mk index a3dcc05..bef1c45 100644 --- a/support/regression/ports/pic14/spec.mk +++ b/support/regression/ports/pic14/spec.mk @@ -12,13 +12,9 @@ endif ifndef SDCC_BIN_PATH ifndef CROSSCOMPILING - SDCCFLAGS += --nostdinc -I$(top_srcdir)/device/include/pic14 -I$(top_srcdir)/device/non-free/include/pic14 -I$(top_srcdir) - LINKFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/pic14 -L$(top_builddir)/device/non-free/lib/build/pic14 - else - SDCCFLAGS += --use-non-free + SDCCFLAGS += --nostdinc -I$(top_srcdir)/device/include/pic14 -I$(top_srcdir) + LINKFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/pic14 endif -else - SDCCFLAGS += --use-non-free endif ifdef CROSSCOMPILING @@ -26,7 +22,6 @@ ifdef CROSSCOMPILING endif SDCCFLAGS += -mpic14 -pp16f877 --less-pedantic -Wl,-q -SDCCFLAGS += --no-warn-non-free LINKFLAGS += libsdcc.lib libm.lib OBJEXT = .o diff --git a/support/regression/ports/pic16/spec.mk b/support/regression/ports/pic16/spec.mk index 1f94cde..f1ac726 100644 --- a/support/regression/ports/pic16/spec.mk +++ b/support/regression/ports/pic16/spec.mk @@ -12,13 +12,9 @@ endif ifndef SDCC_BIN_PATH ifndef CROSSCOMPILING - SDCCFLAGS += --nostdinc -I$(top_srcdir)/device/include/pic16 -I$(top_srcdir)/device/non-free/include/pic16 -I$(top_srcdir) - LINKFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/pic16 -L$(top_builddir)/device/non-free/lib/build/pic16 - else - SDCCFLAGS += --use-non-free + SDCCFLAGS += --nostdinc -I$(top_srcdir)/device/include/pic16 -I$(top_srcdir) + LINKFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/pic16 endif -else - SDCCFLAGS += --use-non-free endif ifdef CROSSCOMPILING @@ -27,7 +23,6 @@ endif SDCCFLAGS += -mpic16 -pp18f452 --less-pedantic -Wl,-q SDCCFLAGS += --no-peep -SDCCFLAGS += --no-warn-non-free LINKFLAGS += libsdcc.lib libc18f.lib libm18f.lib OBJEXT = .o diff --git a/support/scripts/cinc2h.pl b/support/scripts/cinc2h.pl index 8558135..30d72b7 100755 --- a/support/scripts/cinc2h.pl +++ b/support/scripts/cinc2h.pl @@ -39,58 +39,10 @@ ------------------------------------------------- - Steps to add a new target device to SDCC/PIC16: - (Following Raphael Neider ) - - 1. Create the picDEVICE.c and picDEVICE.h from pDEVICE.inc using - ./cinc2h.pl -p 18f4520 -cb -cp -gp "path/to/gputils_source" -o "path/to/output" - - 2. mv picDEVICE.h $SDCC/device/non-free/include/pic16 - 3. mv picDEVICE.c $SDCC/device/non-free/lib/pic16/libdev - 4. either - - (a) adjust $SDCC/device/lib/pic16/libio/*.ignore - if the device does not support ADC, I2C, or USART - --- OR --- - (b) adjust - * SDCC/scripts/pic18fam-h-gen.pl - * SDCC/device/include/pic16/adc.h (if required) - * SDCC/device/include/pic16/usart.h (if required) - * SDCC/device/lib/pic16/libio/*/* (if required) - to add the new device to the appropriate I/O style - and implement new styles (if required). - - Having modified pic18fam-h-gen.pl, you need to run the - script to generate pic18fam.h.gen, which in turn must - then replace your .../include/pic16/pic18fam.h to take - effect; see pic18fam-h-gen.pl for usage information. - 6. edit $SDCC/device/include/pic16/pic18fregs.h - 7. edit $SDCC/device/include/pic16/pic16devices.txt - 8. run cd $SDCC/device/non-free/lib/pic16 && sh update.sh - to regenerate .../libdev/Makefile.am and processors.ac - - The file format of steps 6 and 7 is self explanatory, in most - if not all cases you can copy and paste another device's records - and adjust them to the newly added device. - - ------------------------------------------------- - - Steps to add a new target device to SDCC/PIC14: - - 1. Create the picDEVICE.c and picDEVICE.h from pDEVICE.inc using - ./cinc2h.pl -p 16f1503 -cb -cp -gp "path/to/gputils_source" -o "path/to/output" - - 2. mv picDEVICE.h $SDCC/device/non-free/include/pic14 - 3. mv picDEVICE.c $SDCC/device/non-free/lib/pic14/libdev - 4. add DEVICE to $SDCC/device/non-free/lib/pic14/libdev/devices.txt - (The names of the enhanced devices the "# enhanced cores" line - after follow.) - - 5. edit $SDCC/device/include/pic14/pic14devices.txt - - The file format of step 5 is self explanatory, in most if not all - cases you can copy and paste another device's records and adjust - them to the newly added device. + For its inclusion in the SDCC package distributed with GNU Guix + (https://guix.gnu.org/) this file has been modified from the + original to remove instructions on its use with non-free software + and to update the output of the print_license subroutine below. $Id: cinc2h.pl 9450 2016-01-09 16:47:43Z molnarkaroly $ =cut @@ -1345,10 +1297,9 @@ sub print_license($) * Microchip header (.inc) and linker script (.lkr) files Microchip * requires that "The header files should state that they are only to be * used with authentic Microchip devices" which makes them incompatible - * with the GPL. Pic device libraries and header files are located at - * non-free/lib and non-free/include directories respectively. - * Sdcc should be run with the --use-non-free command line option in - * order to include non-free header files and libraries. + * with the GPL. These non-free libraries and header files (and the + * build and run-time options that enable their use) are omitted in the + * SDCC package distributed with GNU Guix. * * See http://sdcc.sourceforge.net/ for the latest information on sdcc. */ diff --git a/support/scripts/pic14-header-parser.pl b/support/scripts/pic14-header-parser.pl index 4413c25..57c6076 100755 --- a/support/scripts/pic14-header-parser.pl +++ b/support/scripts/pic14-header-parser.pl @@ -63,9 +63,7 @@ use constant P_SHOW_ONLY_NAME => 3; my @default_paths = ( - '/usr/share/sdcc/non-free/include', '/usr/share/sdcc/include', - '/usr/local/share/sdcc/non-free/include', '/usr/local/share/sdcc/include' ); diff --git a/support/scripts/pic16-header-parser.pl b/support/scripts/pic16-header-parser.pl index 6db417a..4b35225 100755 --- a/support/scripts/pic16-header-parser.pl +++ b/support/scripts/pic16-header-parser.pl @@ -62,9 +62,7 @@ use constant P_SHOW_ONLY_NAME => 3; my @default_paths = ( - '/usr/share/sdcc/non-free/include', '/usr/share/sdcc/include', - '/usr/local/share/sdcc/non-free/include', '/usr/local/share/sdcc/include' ); diff --git a/support/scripts/sdcc.nsi b/support/scripts/sdcc.nsi index cebb8a6..778472a 100644 --- a/support/scripts/sdcc.nsi +++ b/support/scripts/sdcc.nsi @@ -480,11 +480,6 @@ ${Section} "SDCC include files" SEC05 SetOutPath "$INSTDIR\include" File "${DEV_ROOT}\include\*.h" - - SetOutPath "$INSTDIR\non-free\include\pic14" - File "${DEV_ROOT}\non-free\include\pic14\*.h" - SetOutPath "$INSTDIR\non-free\include\pic16" - File "${DEV_ROOT}\non-free\include\pic16\*.h" ${SectionEnd} ${Section} "SDCC DS390 library" SEC06 @@ -582,18 +577,12 @@ ${Section} "SDCC PIC16 library" SEC21 SetOutPath "$INSTDIR\lib\pic16" File "${DEV_ROOT}\lib\pic16\*.o" File "${DEV_ROOT}\lib\pic16\*.lib" - - SetOutPath "$INSTDIR\non-free\lib\pic16" - File "${DEV_ROOT}\non-free\lib\pic16\*.lib" ${SectionEnd} ${Section} "SDCC PIC14 library" SEC22 SectionIn 1 2 SetOutPath "$INSTDIR\lib\pic14" File "${DEV_ROOT}\lib\pic14\*.lib" - - SetOutPath "$INSTDIR\non-free\lib\pic14" - File "${DEV_ROOT}\non-free\lib\pic14\*.lib" ${SectionEnd} ${Section} "SDCC STM8 small model library" SEC23 @@ -702,10 +691,6 @@ ${Section} "SDCC library sources" SEC25 File "${DEV_ROOT}\lib\src\pic14\libsdcc\enhanced\*.inc" # File "${DEV_ROOT}\lib\src\pic14\libsdcc\Makefile" - SetOutPath "$INSTDIR\non-free\lib\src\pic14\libdev" - File "${DEV_ROOT}\non-free\lib\src\pic14\libdev\*.c" -# File "${DEV_ROOT}\non-free\lib\src\pic14\libdev\Makefile" - SetOutPath "$INSTDIR\lib\src\pic14\libm" # File "${DEV_ROOT}\lib\src\pic14\libm\*.c" @@ -757,10 +742,6 @@ ${Section} "SDCC library sources" SEC25 File "${DEV_ROOT}\lib\src\pic16\libc\utils\*.S" # File "${DEV_ROOT}\lib\src\pic16\libc\utils\Makefile" - SetOutPath "$INSTDIR\non-free\lib\src\pic16\libdev" - File "${DEV_ROOT}\non-free\lib\src\pic16\libdev\*.c" -# File "${DEV_ROOT}\non-free\lib\src\pic16\libdev\Makefile" - SetOutPath "$INSTDIR\lib\src\pic16\libio" File "${DEV_ROOT}\lib\src\pic16\libio\*.ignore" # File "${DEV_ROOT}\lib\src\pic16\libio\Makefile" @@ -1126,13 +1107,9 @@ ${Section} Uninstall SECUNINSTALL Delete "$INSTDIR\lib\pic14\*.lib" - Delete "$INSTDIR\non-free\lib\pic14\*.lib" - Delete "$INSTDIR\lib\pic16\*.o" Delete "$INSTDIR\lib\pic16\*.lib" - Delete "$INSTDIR\non-free\lib\pic16\*.lib" - Delete "$INSTDIR\lib\hc08\*.lib" Delete "$INSTDIR\lib\s08\*.lib" @@ -1208,9 +1185,7 @@ ${Section} Uninstall SECUNINSTALL Delete "$INSTDIR\include\pic14\*.h" Delete "$INSTDIR\include\pic14\*.txt" Delete "$INSTDIR\include\pic14\*.inc" - Delete "$INSTDIR\non-free\include\pic14\*.h" Delete "$INSTDIR\include\pic16\*.h" - Delete "$INSTDIR\non-free\include\pic16\*.h" Delete "$INSTDIR\include\pic16\*.txt" Delete "$INSTDIR\include\mcs51\*.h" Delete "$INSTDIR\include\hc08\*.h" @@ -1273,9 +1248,7 @@ ${Section} Uninstall SECUNINSTALL Delete "$INSTDIR\uninstall.exe" RMDir /r "$INSTDIR\lib\src\pic14" - RMDir /r "$INSTDIR\non-free\lib\src\pic14" RMDir /r "$INSTDIR\lib\src\pic16" - RMDir /r "$INSTDIR\non-free\lib\src\pic16" RMDir "$INSTDIR\lib\src\small" RMDir "$INSTDIR\lib\src\medium" RMDir "$INSTDIR\lib\src\large" @@ -1303,12 +1276,9 @@ ${Section} Uninstall SECUNINSTALL RMDir "$INSTDIR\lib\src\mos6502" RMDir "$INSTDIR\lib\src\z80n" RMDir "$INSTDIR\lib\src" - RMDir "$INSTDIR\non-free\lib\src" RMDir "$INSTDIR\lib\pic14" - RMDir "$INSTDIR\non-free\lib\pic14" RMDir "$INSTDIR\lib\pic16" - RMDir "$INSTDIR\non-free\lib\pic16" RMDir "$INSTDIR\lib\z80" RMDir "$INSTDIR\lib\z180" RMDir "$INSTDIR\lib\r2k" @@ -1336,15 +1306,12 @@ ${Section} Uninstall SECUNINSTALL RMDir "$INSTDIR\lib\mos6502" RMDir "$INSTDIR\lib\z80n" RMDir "$INSTDIR\lib" - RMDir "$INSTDIR\non-free\lib" RMDir "$INSTDIR\include\asm\z80" RMDir "$INSTDIR\include\asm\r2k" RMDir "$INSTDIR\include\asm\r3ka" RMDir "$INSTDIR\include\asm\pic16" - RMDir "$INSTDIR\non-free\include\asm\pic16" RMDir "$INSTDIR\include\asm\pic14" - RMDir "$INSTDIR\non-free\include\asm\pic14" RMDir "$INSTDIR\include\asm\mcs51" RMDir "$INSTDIR\include\asm\sm83" RMDir "$INSTDIR\include\asm\ds390" @@ -1353,17 +1320,12 @@ ${Section} Uninstall SECUNINSTALL RMDir "$INSTDIR\include\asm" RMDir "$INSTDIR\include\z180" RMDir "$INSTDIR\include\pic14" - RMDir "$INSTDIR\non-free\include\pic14" RMDir "$INSTDIR\include\pic16" - RMDir "$INSTDIR\non-free\include\pic16" RMDir "$INSTDIR\include\mcs51" RMDir "$INSTDIR\include\hc08" RMDir "$INSTDIR\include\ds400" RMDir "$INSTDIR\include\ds390" RMDir "$INSTDIR\include" - RMDir "$INSTDIR\non-free\include" - - RMDir "$INSTDIR\non-free" !ifdef FULL_DOC RMDir /r "$INSTDIR\doc"