Reorder using Stow better

1 files changed, 0 insertions, 1198 deletions

diff --git a/kitty/kitty.conf b/kitty/kitty.conf
deleted file mode 100644
index 4b8a0c1..0000000
--- a/kitty/kitty.conf
+++ /dev/null
@@ -1,1198 +0,0 @@
-# vim:fileencoding=utf-8:ft=conf:foldmethod=marker
-
-#: Fonts {{{
-
-#: kitty has very powerful font management. You can configure
-#: individual font faces and even specify special fonts for particular
-#: characters.
-
-font_family      B612 Mono Regular
-bold_font        B612 Mono Bold
-italic_font      B612 Mono Italic
-bold_italic_font B612 Mono BoldItalic
-
-#: You can specify different fonts for the bold/italic/bold-italic
-#: variants. To get a full list of supported fonts use the `kitty
-#: list-fonts` command. By default they are derived automatically, by
-#: the OSes font system. Setting them manually is useful for font
-#: families that have many weight variants like Book, Medium, Thick,
-#: etc. For example::
-
-#:     font_family      Operator Mono Book
-#:     bold_font        Operator Mono Medium
-#:     italic_font      Operator Mono Book Italic
-#:     bold_italic_font Operator Mono Medium Italic
-
-font_size 12.0
-
-#: Font size (in pts)
-
-# force_ltr no
-
-#: kitty does not support BIDI (bidirectional text), however, for RTL
-#: scripts, words are automatically displayed in RTL. That is to say,
-#: in an RTL script, the words "HELLO WORLD" display in kitty as
-#: "WORLD HELLO", and if you try to select a substring of an RTL-
-#: shaped string, you will get the character that would be there had
-#: the the string been LTR. For example, assuming the Hebrew word
-#: ירושלים, selecting the character that on the screen appears to be ם
-#: actually writes into the selection buffer the character י.
-
-#: kitty's default behavior is useful in conjunction with a filter to
-#: reverse the word order, however, if you wish to manipulate RTL
-#: glyphs, it can be very challenging to work with, so this option is
-#: provided to turn it off. Furthermore, this option can be used with
-#: the command line program GNU FriBidi
-#: <https://github.com/fribidi/fribidi#executable> to get BIDI
-#: support, because it will force kitty to always treat the text as
-#: LTR, which FriBidi expects for terminals.
-
-adjust_line_height  0
-adjust_column_width 0
-
-#: Change the size of each character cell kitty renders. You can use
-#: either numbers, which are interpreted as pixels or percentages
-#: (number followed by %), which are interpreted as percentages of the
-#: unmodified values. You can use negative pixels or percentages less
-#: than 100% to reduce sizes (but this might cause rendering
-#: artifacts).
-
-# symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols
-
-#: Map the specified unicode codepoints to a particular font. Useful
-#: if you need special rendering for some symbols, such as for
-#: Powerline. Avoids the need for patched fonts. Each unicode code
-#: point is specified in the form U+<code point in hexadecimal>. You
-#: can specify multiple code points, separated by commas and ranges
-#: separated by hyphens. symbol_map itself can be specified multiple
-#: times. Syntax is::
-
-#:     symbol_map codepoints Font Family Name
-
-disable_ligatures never
-
-#: Choose how you want to handle multi-character ligatures. The
-#: default is to always render them.  You can tell kitty to not render
-#: them when the cursor is over them by using cursor to make editing
-#: easier, or have kitty never render them at all by using always, if
-#: you don't like them. The ligature strategy can be set per-window
-#: either using the kitty remote control facility or by defining
-#: shortcuts for it in kitty.conf, for example::
-
-#:     map alt+1 disable_ligatures_in active always
-#:     map alt+2 disable_ligatures_in all never
-#:     map alt+3 disable_ligatures_in tab cursor
-
-# font_features none
-
-#: Choose exactly which OpenType features to enable or disable. This
-#: is useful as some fonts might have features worthwhile in a
-#: terminal. For example, Fira Code Retina includes a discretionary
-#: feature, zero, which in that font changes the appearance of the
-#: zero (0), to make it more easily distinguishable from Ø. Fira Code
-#: Retina also includes other discretionary features known as
-#: Stylistic Sets which have the tags ss01 through ss20.
-
-#: Note that this code is indexed by PostScript name, and not the font
-#: family. This allows you to define very precise feature settings;
-#: e.g. you can disable a feature in the italic font but not in the
-#: regular font.
-
-#: To get the PostScript name for a font, use kitty + list-fonts
-#: --psnames::
-
-#:     $ kitty + list-fonts --psnames | grep Fira
-#:     Fira Code
-#:     Fira Code Bold (FiraCode-Bold)
-#:     Fira Code Light (FiraCode-Light)
-#:     Fira Code Medium (FiraCode-Medium)
-#:     Fira Code Regular (FiraCode-Regular)
-#:     Fira Code Retina (FiraCode-Retina)
-
-#: The part in brackets is the PostScript name.
-
-#: Enable alternate zero and oldstyle numerals::
-
-#:     font_features FiraCode-Retina +zero +onum
-
-#: Enable only alternate zero::
-
-#:     font_features FiraCode-Retina +zero
-
-#: Disable the normal ligatures, but keep the calt feature which (in
-#: this font) breaks up monotony::
-
-#:     font_features TT2020StyleB-Regular -liga +calt
-
-#: In conjunction with force_ltr, you may want to disable Arabic
-#: shaping entirely, and only look at their isolated forms if they
-#: show up in a document. You can do this with e.g.::
-
-#:     font_features UnifontMedium +isol -medi -fina -init
-
-box_drawing_scale 0.001, 1, 1.5, 2
-
-#: Change the sizes of the lines used for the box drawing unicode
-#: characters These values are in pts. They will be scaled by the
-#: monitor DPI to arrive at a pixel value. There must be four values
-#: corresponding to thin, normal, thick, and very thick lines.
-
-#: }}}
-
-#: Cursor customization {{{
-
-cursor #cccccc
-
-#: Default cursor color
-
-cursor_text_color #111111
-
-#: Choose the color of text under the cursor. If you want it rendered
-#: with the background color of the cell underneath instead, use the
-#: special keyword: background
-
-cursor_shape block
-
-#: The cursor shape can be one of (block, beam, underline)
-
-cursor_blink_interval -1
-
-#: The interval (in seconds) at which to blink the cursor. Set to zero
-#: to disable blinking. Negative values mean use system default. Note
-#: that numbers smaller than repaint_delay will be limited to
-#: repaint_delay.
-
-cursor_stop_blinking_after 15.0
-
-#: Stop blinking cursor after the specified number of seconds of
-#: keyboard inactivity.  Set to zero to never stop blinking.
-
-#: }}}
-
-#: Scrollback {{{
-
-scrollback_lines -1
-
-#: Number of lines of history to keep in memory for scrolling back.
-#: Memory is allocated on demand. Negative numbers are (effectively)
-#: infinite scrollback. Note that using very large scrollback is not
-#: recommended as it can slow down resizing of the terminal and also
-#: use large amounts of RAM.
-
-scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
-
-#: Program with which to view scrollback in a new window. The
-#: scrollback buffer is passed as STDIN to this program. If you change
-#: it, make sure the program you use can handle ANSI escape sequences
-#: for colors and text formatting. INPUT_LINE_NUMBER in the command
-#: line above will be replaced by an integer representing which line
-#: should be at the top of the screen.
-
-scrollback_pager_history_size 0
-
-#: Separate scrollback history size, used only for browsing the
-#: scrollback buffer (in MB). This separate buffer is not available
-#: for interactive scrolling but will be piped to the pager program
-#: when viewing scrollback buffer in a separate window. The current
-#: implementation stores one character in 4 bytes, so approximatively
-#: 2500 lines per megabyte at 100 chars per line. A value of zero or
-#: less disables this feature. The maximum allowed size is 4GB.
-
-wheel_scroll_multiplier 5.0
-
-#: Modify the amount scrolled by the mouse wheel. Note this is only
-#: used for low precision scrolling devices, not for high precision
-#: scrolling on platforms such as macOS and Wayland. Use negative
-#: numbers to change scroll direction.
-
-touch_scroll_multiplier 1.0
-
-#: Modify the amount scrolled by a touchpad. Note this is only used
-#: for high precision scrolling devices on platforms such as macOS and
-#: Wayland. Use negative numbers to change scroll direction.
-
-#: }}}
-
-#: Mouse {{{
-
-mouse_hide_wait 3.0
-
-#: Hide mouse cursor after the specified number of seconds of the
-#: mouse not being used. Set to zero to disable mouse cursor hiding.
-#: Set to a negative value to hide the mouse cursor immediately when
-#: typing text. Disabled by default on macOS as getting it to work
-#: robustly with the ever-changing sea of bugs that is Cocoa is too
-#: much effort.
-
-url_color #0087bd
-url_style curly
-
-#: The color and style for highlighting URLs on mouse-over. url_style
-#: can be one of: none, single, double, curly
-
-open_url_modifiers kitty_mod
-
-#: The modifier keys to press when clicking with the mouse on URLs to
-#: open the URL
-
-open_url_with default
-
-#: The program with which to open URLs that are clicked on. The
-#: special value default means to use the operating system's default
-#: URL handler.
-
-copy_on_select no
-
-#: Copy to clipboard or a private buffer on select. With this set to
-#: clipboard, simply selecting text with the mouse will cause the text
-#: to be copied to clipboard. Useful on platforms such as macOS that
-#: do not have the concept of primary selections. You can instead
-#: specify a name such as a1 to copy to a private kitty buffer
-#: instead. Map a shortcut with the paste_from_buffer action to paste
-#: from this private buffer. For example::
-
-#:     map cmd+shift+v paste_from_buffer a1
-
-#: Note that copying to the clipboard is a security risk, as all
-#: programs, including websites open in your browser can read the
-#: contents of the system clipboard.
-
-strip_trailing_spaces never
-
-#: Remove spaces at the end of lines when copying to clipboard. A
-#: value of smart will do it when using normal selections, but not
-#: rectangle selections. always will always do it.
-
-rectangle_select_modifiers ctrl+alt
-
-#: The modifiers to use rectangular selection (i.e. to select text in
-#: a rectangular block with the mouse)
-
-terminal_select_modifiers shift
-
-#: The modifiers to override mouse selection even when a terminal
-#: application has grabbed the mouse
-
-select_by_word_characters :@-./_~?&=%+#
-
-#: Characters considered part of a word when double clicking. In
-#: addition to these characters any character that is marked as an
-#: alphanumeric character in the unicode database will be matched.
-
-click_interval -1.0
-
-#: The interval between successive clicks to detect double/triple
-#: clicks (in seconds). Negative numbers will use the system default
-#: instead, if available, or fallback to 0.5.
-
-focus_follows_mouse no
-
-#: Set the active window to the window under the mouse when moving the
-#: mouse around
-
-pointer_shape_when_grabbed arrow
-
-#: The shape of the mouse pointer when the program running in the
-#: terminal grabs the mouse. Valid values are: arrow, beam and hand
-
-#: }}}
-
-#: Performance tuning {{{
-
-repaint_delay 10
-
-#: Delay (in milliseconds) between screen updates. Decreasing it,
-#: increases frames-per-second (FPS) at the cost of more CPU usage.
-#: The default value yields ~100 FPS which is more than sufficient for
-#: most uses. Note that to actually achieve 100 FPS you have to either
-#: set sync_to_monitor to no or use a monitor with a high refresh
-#: rate. Also, to minimize latency when there is pending input to be
-#: processed, repaint_delay is ignored.
-
-input_delay 3
-
-#: Delay (in milliseconds) before input from the program running in
-#: the terminal is processed. Note that decreasing it will increase
-#: responsiveness, but also increase CPU usage and might cause flicker
-#: in full screen programs that redraw the entire screen on each loop,
-#: because kitty is so fast that partial screen updates will be drawn.
-
-sync_to_monitor yes
-
-#: Sync screen updates to the refresh rate of the monitor. This
-#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
-#: when scrolling. However, it limits the rendering speed to the
-#: refresh rate of your monitor. With a very high speed mouse/high
-#: keyboard repeat rate, you may notice some slight input latency. If
-#: so, set this to no.
-
-#: }}}
-
-#: Terminal bell {{{
-
-enable_audio_bell no
-
-#: Enable/disable the audio bell. Useful in environments that require
-#: silence.
-
-visual_bell_duration 0.0
-
-#: Visual bell duration. Flash the screen when a bell occurs for the
-#: specified number of seconds. Set to zero to disable.
-
-window_alert_on_bell yes
-
-#: Request window attention on bell. Makes the dock icon bounce on
-#: macOS or the taskbar flash on linux.
-
-bell_on_tab yes
-
-#: Show a bell symbol on the tab if a bell occurs in one of the
-#: windows in the tab and the window is not the currently focused
-#: window
-
-command_on_bell none
-
-#: Program to run when a bell occurs.
-
-#: }}}
-
-#: Window layout {{{
-
-remember_window_size  yes
-initial_window_width  640
-initial_window_height 400
-
-#: If enabled, the window size will be remembered so that new
-#: instances of kitty will have the same size as the previous
-#: instance. If disabled, the window will initially have size
-#: configured by initial_window_width/height, in pixels. You can use a
-#: suffix of "c" on the width/height values to have them interpreted
-#: as number of cells instead of pixels.
-
-enabled_layouts *
-
-#: The enabled window layouts. A comma separated list of layout names.
-#: The special value all means all layouts. The first listed layout
-#: will be used as the startup layout. Default configuration is all
-#: layouts in alphabetical order. For a list of available layouts, see
-#: the https://sw.kovidgoyal.net/kitty/index.html#layouts.
-
-window_resize_step_cells 2
-window_resize_step_lines 2
-
-#: The step size (in units of cell width/cell height) to use when
-#: resizing windows. The cells value is used for horizontal resizing
-#: and the lines value for vertical resizing.
-
-window_border_width 1.0
-
-#: The width (in pts) of window borders. Will be rounded to the
-#: nearest number of pixels based on screen resolution. Note that
-#: borders are displayed only when more than one window is visible.
-#: They are meant to separate multiple windows.
-
-draw_minimal_borders yes
-
-#: Draw only the minimum borders needed. This means that only the
-#: minimum needed borders for inactive windows are drawn. That is only
-#: the borders that separate the inactive window from a neighbor. Note
-#: that setting a non-zero window margin overrides this and causes all
-#: borders to be drawn.
-
-window_margin_width 0.0
-
-#: The window margin (in pts) (blank area outside the border)
-
-single_window_margin_width -1000.0
-
-#: The window margin (in pts) to use when only a single window is
-#: visible. Negative values will cause the value of
-#: window_margin_width to be used instead.
-
-window_padding_width 0.0
-
-#: The window padding (in pts) (blank area between the text and the
-#: window border)
-
-placement_strategy center
-
-#: When the window size is not an exact multiple of the cell size, the
-#: cell area of the terminal window will have some extra padding on
-#: the sides. You can control how that padding is distributed with
-#: this option. Using a value of center means the cell area will be
-#: placed centrally. A value of top-left means the padding will be on
-#: only the bottom and right edges.
-
-active_border_color #00ff00
-
-#: The color for the border of the active window. Set this to none to
-#: not draw borders around the active window.
-
-inactive_border_color #cccccc
-
-#: The color for the border of inactive windows
-
-bell_border_color #ff5a00
-
-#: The color for the border of inactive windows in which a bell has
-#: occurred
-
-inactive_text_alpha 1.0
-
-#: Fade the text in inactive windows by the specified amount (a number
-#: between zero and one, with zero being fully faded).
-
-hide_window_decorations no
-
-#: Hide the window decorations (title-bar and window borders) with
-#: yes. On macOS, titlebar-only can be used to only hide the titlebar.
-#: Whether this works and exactly what effect it has depends on the
-#: window manager/operating system.
-
-resize_debounce_time 0.1
-
-#: The time (in seconds) to wait before redrawing the screen when a
-#: resize event is received. On platforms such as macOS, where the
-#: operating system sends events corresponding to the start and end of
-#: a resize, this number is ignored.
-
-resize_draw_strategy static
-
-#: Choose how kitty draws a window while a resize is in progress. A
-#: value of static means draw the current window contents, mostly
-#: unchanged. A value of scale means draw the current window contents
-#: scaled. A value of blank means draw a blank window. A value of size
-#: means show the window size in cells.
-
-# resize_in_steps no
-
-#: Resize the OS window in steps as large as the cells, instead of
-#: with the usual pixel accuracy. Combined with an
-#: initial_window_width and initial_window_height in number of cells,
-#: this option can be used to keep the margins as small as possible
-#: when resizing the OS window. Note that this does not currently work
-#: on Wayland.
-
-#: }}}
-
-#: Tab bar {{{
-
-tab_bar_edge bottom
-
-#: Which edge to show the tab bar on, top or bottom
-
-tab_bar_margin_width 0.0
-
-#: The margin to the left and right of the tab bar (in pts)
-
-tab_bar_style fade
-
-#: The tab bar style, can be one of: fade, separator, powerline, or
-#: hidden. In the fade style, each tab's edges fade into the
-#: background color, in the separator style, tabs are separated by a
-#: configurable separator, and the powerline shows the tabs as a
-#: continuous line.
-
-tab_bar_min_tabs 2
-
-#: The minimum number of tabs that must exist before the tab bar is
-#: shown
-
-tab_switch_strategy previous
-
-#: The algorithm to use when switching to a tab when the current tab
-#: is closed. The default of previous will switch to the last used
-#: tab. A value of left will switch to the tab to the left of the
-#: closed tab. A value of last will switch to the right-most tab.
-
-tab_fade 0.25 0.5 0.75 1
-
-#: Control how each tab fades into the background when using fade for
-#: the tab_bar_style. Each number is an alpha (between zero and one)
-#: that controls how much the corresponding cell fades into the
-#: background, with zero being no fade and one being full fade. You
-#: can change the number of cells used by adding/removing entries to
-#: this list.
-
-tab_separator " ┇"
-
-#: The separator between tabs in the tab bar when using separator as
-#: the tab_bar_style.
-
-tab_title_template {title}
-
-#: A template to render the tab title. The default just renders the
-#: title. If you wish to include the tab-index as well, use something
-#: like: {index}: {title}. Useful if you have shortcuts mapped for
-#: goto_tab N.
-
-# active_tab_title_template none
-
-#: Template to use for active tabs, if not specified falls back to
-#: tab_title_template.
-
-active_tab_foreground   #000
-active_tab_background   #eee
-active_tab_font_style   bold-italic
-inactive_tab_foreground #444
-inactive_tab_background #999
-inactive_tab_font_style normal
-
-#: Tab bar colors and styles
-
-# tab_bar_background none
-
-#: Background color for the tab bar. Defaults to using the terminal
-#: background color.
-
-#: }}}
-
-#: Color scheme {{{
-
-foreground #dddddd
-background #000000
-
-#: The foreground and background colors
-
-background_opacity 1.0
-
-#: The opacity of the background. A number between 0 and 1, where 1 is
-#: opaque and 0 is fully transparent.  This will only work if
-#: supported by the OS (for instance, when using a compositor under
-#: X11). Note that it only sets the default background color's
-#: opacity. This is so that things like the status bar in vim,
-#: powerline prompts, etc. still look good.  But it means that if you
-#: use a color theme with a background color in your editor, it will
-#: not be rendered as transparent.  Instead you should change the
-#: default background color in your kitty config and not use a
-#: background color in the editor color scheme. Or use the escape
-#: codes to set the terminals default colors in a shell script to
-#: launch your editor.  Be aware that using a value less than 1.0 is a
-#: (possibly significant) performance hit.  If you want to dynamically
-#: change transparency of windows set dynamic_background_opacity to
-#: yes (this is off by default as it has a performance cost)
-
-dynamic_background_opacity no
-
-#: Allow changing of the background_opacity dynamically, using either
-#: keyboard shortcuts (increase_background_opacity and
-#: decrease_background_opacity) or the remote control facility.
-
-dim_opacity 0.75
-
-#: How much to dim text that has the DIM/FAINT attribute set. One
-#: means no dimming and zero means fully dimmed (i.e. invisible).
-
-selection_foreground #000000
-
-#: The foreground for text selected with the mouse. A value of none
-#: means to leave the color unchanged.
-
-selection_background #fffacd
-
-#: The background for text selected with the mouse.
-
-
-#: The 16 terminal colors. There are 8 basic colors, each color has a
-#: dull and bright version. You can also set the remaining colors from
-#: the 256 color table as color16 to color255.
-
-color0 #000000
-color8 #767676
-
-#: black
-
-color1 #cc0403
-color9 #f2201f
-
-#: red
-
-color2  #19cb00
-color10 #23fd00
-
-#: green
-
-color3  #cecb00
-color11 #fffd00
-
-#: yellow
-
-color4  #0d73cc
-color12 #1a8fff
-
-#: blue
-
-color5  #cb1ed1
-color13 #fd28ff
-
-#: magenta
-
-color6  #0dcdcd
-color14 #14ffff
-
-#: cyan
-
-color7  #dddddd
-color15 #ffffff
-
-#: white
-
-# mark1_foreground black
-
-#: Color for marks of type 1
-
-# mark1_background #98d3cb
-
-#: Color for marks of type 1 (light steel blue)
-
-# mark2_foreground black
-
-#: Color for marks of type 2
-
-# mark2_background #f2dcd3
-
-#: Color for marks of type 1 (beige)
-
-# mark3_foreground black
-
-#: Color for marks of type 3
-
-# mark3_background #f274bc
-
-#: Color for marks of type 1 (violet)
-
-#: }}}
-
-#: Advanced {{{
-
-shell .
-
-#: The shell program to execute. The default value of . means to use
-#: whatever shell is set as the default shell for the current user.
-#: Note that on macOS if you change this, you might need to add
-#: --login to ensure that the shell starts in interactive mode and
-#: reads its startup rc files.
-
-editor .
-
-#: The console editor to use when editing the kitty config file or
-#: similar tasks. A value of . means to use the environment variables
-#: VISUAL and EDITOR in that order. Note that this environment
-#: variable has to be set not just in your shell startup scripts but
-#: system-wide, otherwise kitty will not see it.
-
-close_on_child_death no
-
-#: Close the window when the child process (shell) exits. If no (the
-#: default), the terminal will remain open when the child exits as
-#: long as there are still processes outputting to the terminal (for
-#: example disowned or backgrounded processes). If yes, the window
-#: will close as soon as the child process exits. Note that setting it
-#: to yes means that any background processes still using the terminal
-#: can fail silently because their stdout/stderr/stdin no longer work.
-
-allow_remote_control no
-
-#: Allow other programs to control kitty. If you turn this on other
-#: programs can control all aspects of kitty, including sending text
-#: to kitty windows, opening new windows, closing windows, reading the
-#: content of windows, etc.  Note that this even works over ssh
-#: connections. You can chose to either allow any program running
-#: within kitty to control it, with yes or only programs that connect
-#: to the socket specified with the kitty --listen-on command line
-#: option, if you use the value socket-only. The latter is useful if
-#: you want to prevent programs running on a remote computer over ssh
-#: from controlling kitty.
-
-# env 
-
-#: Specify environment variables to set in all child processes. Note
-#: that environment variables are expanded recursively, so if you
-#: use::
-
-#:     env MYVAR1=a
-#:     env MYVAR2=${MYVAR1}/${HOME}/b
-
-#: The value of MYVAR2 will be a/<path to home directory>/b.
-
-update_check_interval 24
-
-#: Periodically check if an update to kitty is available. If an update
-#: is found a system notification is displayed informing you of the
-#: available update. The default is to check every 24 hrs, set to zero
-#: to disable.
-
-startup_session none
-
-#: Path to a session file to use for all kitty instances. Can be
-#: overridden by using the kitty --session command line option for
-#: individual instances. See
-#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty
-#: documentation for details. Note that relative paths are interpreted
-#: with respect to the kitty config directory. Environment variables
-#: in the path are expanded.
-
-clipboard_control write-clipboard write-primary
-
-#: Allow programs running in kitty to read and write from the
-#: clipboard. You can control exactly which actions are allowed. The
-#: set of possible actions is: write-clipboard read-clipboard write-
-#: primary read-primary. You can additionally specify no-append to
-#: disable kitty's protocol extension for clipboard concatenation. The
-#: default is to allow writing to the clipboard and primary selection
-#: with concatenation enabled. Note that enabling the read
-#: functionality is a security risk as it means that any program, even
-#: one running on a remote server via SSH can read your clipboard.
-
-term xterm-kitty
-
-#: The value of the TERM environment variable to set. Changing this
-#: can break many terminal programs, only change it if you know what
-#: you are doing, not because you read some advice on Stack Overflow
-#: to change it. The TERM variable is used by various programs to get
-#: information about the capabilities and behavior of the terminal. If
-#: you change it, depending on what programs you run, and how
-#: different the terminal you are changing it to is, various things
-#: from key-presses, to colors, to various advanced features may not
-#: work.
-
-#: }}}
-
-#: OS specific tweaks {{{
-
-macos_titlebar_color system
-
-#: Change the color of the kitty window's titlebar on macOS. A value
-#: of system means to use the default system color, a value of
-#: background means to use the background color of the currently
-#: active window and finally you can use an arbitrary color, such as
-#: #12af59 or red. WARNING: This option works by using a hack, as
-#: there is no proper Cocoa API for it. It sets the background color
-#: of the entire window and makes the titlebar transparent. As such it
-#: is incompatible with background_opacity. If you want to use both,
-#: you are probably better off just hiding the titlebar with
-#: hide_window_decorations.
-
-macos_option_as_alt no
-
-#: Use the option key as an alt key. With this set to no, kitty will
-#: use the macOS native Option+Key = unicode character behavior. This
-#: will break any Alt+key keyboard shortcuts in your terminal
-#: programs, but you can use the macOS unicode input technique. You
-#: can use the values: left, right, or both to use only the left,
-#: right or both Option keys as Alt, instead.
-
-macos_hide_from_tasks no
-
-#: Hide the kitty window from running tasks (Option+Tab) on macOS.
-
-macos_quit_when_last_window_closed no
-
-#: Have kitty quit when all the top-level windows are closed. By
-#: default, kitty will stay running, even with no open windows, as is
-#: the expected behavior on macOS.
-
-macos_window_resizable yes
-
-#: Disable this if you want kitty top-level (OS) windows to not be
-#: resizable on macOS.
-
-macos_thicken_font 0
-
-#: Draw an extra border around the font with the given width, to
-#: increase legibility at small font sizes. For example, a value of
-#: 0.75 will result in rendering that looks similar to sub-pixel
-#: antialiasing at common font sizes.
-
-macos_traditional_fullscreen no
-
-#: Use the traditional full-screen transition, that is faster, but
-#: less pretty.
-
-macos_show_window_title_in all
-
-#: Show or hide the window title in the macOS window or menu-bar. A
-#: value of window will show the title of the currently active window
-#: at the top of the macOS window. A value of menubar will show the
-#: title of the currently active window in the macOS menu-bar, making
-#: use of otherwise wasted space. all will show the title everywhere
-#: and none hides the title in the window and the menu-bar.
-
-macos_custom_beam_cursor no
-
-#: Enable/disable custom mouse cursor for macOS that is easier to see
-#: on both light and dark backgrounds. WARNING: this might make your
-#: mouse cursor invisible on dual GPU machines.
-
-linux_display_server auto
-
-#: Choose between Wayland and X11 backends. By default, an appropriate
-#: backend based on the system state is chosen automatically. Set it
-#: to x11 or wayland to force the choice.
-
-#: }}}
-
-#: Keyboard shortcuts {{{
-
-#: For a list of key names, see: GLFW keys
-#: <https://www.glfw.org/docs/latest/group__keys.html>. The name to
-#: use is the part after the GLFW_KEY_ prefix. For a list of modifier
-#: names, see: GLFW mods
-#: <https://www.glfw.org/docs/latest/group__mods.html>
-
-#: On Linux you can also use XKB key names to bind keys that are not
-#: supported by GLFW. See XKB keys
-#: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
-#: keysyms.h> for a list of key names. The name to use is the part
-#: after the XKB_KEY_ prefix. Note that you should only use an XKB key
-#: name for keys that are not present in the list of GLFW keys.
-
-#: Finally, you can use raw system key codes to map keys. To see the
-#: system key code for a key, start kitty with the kitty --debug-
-#: keyboard option. Then kitty will output some debug text for every
-#: key event. In that text look for ``native_code`` the value of that
-#: becomes the key name in the shortcut. For example:
-
-#: .. code-block:: none
-
-#:     on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'
-
-#: Here, the key name for the A key is 0x61 and you can use it with::
-
-#:     map ctrl+0x61 something
-
-#: to map ctrl+a to something.
-
-#: You can use the special action no_op to unmap a keyboard shortcut
-#: that is assigned in the default configuration::
-
-#:     map kitty_mod+space no_op
-
-#: You can combine multiple actions to be triggered by a single
-#: shortcut, using the syntax below::
-
-#:     map key combine <separator> action1 <separator> action2 <separator> action3 ...
-
-#: For example::
-
-#:     map kitty_mod+e combine : new_window : next_layout
-
-#: this will create a new window and switch to the next available
-#: layout
-
-#: You can use multi-key shortcuts using the syntax shown below::
-
-#:     map key1>key2>key3 action
-
-#: For example::
-
-#:     map ctrl+f>2 set_font_size 20
-
-kitty_mod ctrl+shift
-
-#: The value of kitty_mod is used as the modifier for all default
-#: shortcuts, you can change it in your kitty.conf to change the
-#: modifiers for all the default shortcuts.
-
-clear_all_shortcuts no
-
-#: You can have kitty remove all shortcut definition seen up to this
-#: point. Useful, for instance, to remove the default shortcuts.
-
-# kitten_alias hints hints --hints-offset=0
-
-#: You can create aliases for kitten names, this allows overriding the
-#: defaults for kitten options and can also be used to shorten
-#: repeated mappings of the same kitten with a specific group of
-#: options. For example, the above alias changes the default value of
-#: kitty +kitten hints --hints-offset to zero for all mappings,
-#: including the builtin ones.
-
-#: Clipboard {{{
-
-map kitty_mod+c copy_to_clipboard
-
-#: There is also a copy_or_interrupt action that can be optionally
-#: mapped to Ctrl+c. It will copy only if there is a selection and
-#: send an interrupt otherwise.
-
-map kitty_mod+v  paste_from_clipboard
-map kitty_mod+s  paste_from_selection
-map shift+insert paste_from_selection
-map kitty_mod+o  pass_selection_to_program
-
-#: You can also pass the contents of the current selection to any
-#: program using pass_selection_to_program. By default, the system's
-#: open program is used, but you can specify your own, the selection
-#: will be passed as a command line argument to the program, for
-#: example::
-
-#:     map kitty_mod+o pass_selection_to_program firefox
-
-#: You can pass the current selection to a terminal program running in
-#: a new kitty window, by using the @selection placeholder::
-
-#:     map kitty_mod+y new_window less @selection
-
-#: }}}
-
-#: Scrolling {{{
-
-map kitty_mod+up        scroll_line_up
-map kitty_mod+k         scroll_line_up
-map kitty_mod+down      scroll_line_down
-map kitty_mod+j         scroll_line_down
-map kitty_mod+page_up   scroll_page_up
-map kitty_mod+page_down scroll_page_down
-map kitty_mod+home      scroll_home
-map kitty_mod+end       scroll_end
-map kitty_mod+h         show_scrollback
-
-#: You can pipe the contents of the current screen + history buffer as
-#: STDIN to an arbitrary program using the ``launch`` function. For
-#: example, the following opens the scrollback buffer in less in an
-#: overlay window::
-
-#:     map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R
-
-#: For more details on piping screen and buffer contents to external
-#: programs, see launch.
-
-#: }}}
-
-#: Window management {{{
-
-map kitty_mod+enter new_window
-
-#: You can open a new window running an arbitrary program, for
-#: example::
-
-#:     map kitty_mod+y      launch mutt
-
-#: You can open a new window with the current working directory set to
-#: the working directory of the current window using::
-
-#:     map ctrl+alt+enter    launch --cwd=current
-
-#: You can open a new window that is allowed to control kitty via the
-#: kitty remote control facility by prefixing the command line with @.
-#: Any programs running in that window will be allowed to control
-#: kitty. For example::
-
-#:     map ctrl+enter launch --allow-remote-control some_program
-
-#: You can open a new window next to the currently active window or as
-#: the first window, with::
-
-#:     map ctrl+n launch --location=neighbor some_program
-#:     map ctrl+f launch --location=first some_program
-
-#: For more details, see launch.
-
-map kitty_mod+n new_os_window
-
-#: Works like new_window above, except that it opens a top level OS
-#: kitty window. In particular you can use new_os_window_with_cwd to
-#: open a window with the current working directory.
-
-map kitty_mod+w close_window
-map kitty_mod+] next_window
-map kitty_mod+[ previous_window
-map kitty_mod+f move_window_forward
-map kitty_mod+b move_window_backward
-map kitty_mod+` move_window_to_top
-map kitty_mod+r start_resizing_window
-map kitty_mod+1 first_window
-map kitty_mod+2 second_window
-map kitty_mod+3 third_window
-map kitty_mod+4 fourth_window
-map kitty_mod+5 fifth_window
-map kitty_mod+6 sixth_window
-map kitty_mod+7 seventh_window
-map kitty_mod+8 eighth_window
-map kitty_mod+9 ninth_window
-map kitty_mod+0 tenth_window
-#: }}}
-
-#: Tab management {{{
-
-map kitty_mod+right next_tab
-map kitty_mod+left  previous_tab
-map kitty_mod+t     new_tab
-map kitty_mod+q     close_tab
-map kitty_mod+.     move_tab_forward
-map kitty_mod+,     move_tab_backward
-map kitty_mod+alt+t set_tab_title
-
-#: You can also create shortcuts to go to specific tabs, with 1 being
-#: the first tab, 2 the second tab and -1 being the previously active
-#: tab, and any number larger than the last tab being the last tab::
-
-#:     map ctrl+alt+1 goto_tab 1
-#:     map ctrl+alt+2 goto_tab 2
-
-#: Just as with new_window above, you can also pass the name of
-#: arbitrary commands to run when using new_tab and use
-#: new_tab_with_cwd. Finally, if you want the new tab to open next to
-#: the current tab rather than at the end of the tabs list, use::
-
-#:     map ctrl+t new_tab !neighbor [optional cmd to run]
-#: }}}
-
-#: Layout management {{{
-
-map kitty_mod+l next_layout
-
-#: You can also create shortcuts to switch to specific layouts::
-
-#:     map ctrl+alt+t goto_layout tall
-#:     map ctrl+alt+s goto_layout stack
-
-#: Similarly, to switch back to the previous layout::
-
-#:    map ctrl+alt+p last_used_layout
-#: }}}
-
-#: Font sizes {{{
-
-#: You can change the font size for all top-level kitty OS windows at
-#: a time or only the current one.
-
-map kitty_mod+equal     change_font_size all +2.0
-map kitty_mod+minus     change_font_size all -2.0
-map kitty_mod+backspace change_font_size all 0
-
-#: To setup shortcuts for specific font sizes::
-
-#:     map kitty_mod+f6 change_font_size all 10.0
-
-#: To setup shortcuts to change only the current OS window's font
-#: size::
-
-#:     map kitty_mod+f6 change_font_size current 10.0
-#: }}}
-
-#: Select and act on visible text {{{
-
-#: Use the hints kitten to select text and either pass it to an
-#: external program or insert it into the terminal or copy it to the
-#: clipboard.
-
-map kitty_mod+e kitten hints
-
-#: Open a currently visible URL using the keyboard. The program used
-#: to open the URL is specified in open_url_with.
-
-map kitty_mod+p>f kitten hints --type path --program -
-
-#: Select a path/filename and insert it into the terminal. Useful, for
-#: instance to run git commands on a filename output from a previous
-#: git command.
-
-map kitty_mod+p>shift+f kitten hints --type path
-
-#: Select a path/filename and open it with the default open program.
-
-map kitty_mod+p>l kitten hints --type line --program -
-
-#: Select a line of text and insert it into the terminal. Use for the
-#: output of things like: ls -1
-
-map kitty_mod+p>w kitten hints --type word --program -
-
-#: Select words and insert into terminal.
-
-map kitty_mod+p>h kitten hints --type hash --program -
-
-#: Select something that looks like a hash and insert it into the
-#: terminal. Useful with git, which uses sha1 hashes to identify
-#: commits
-
-map kitty_mod+p>n kitten hints --type linenum
-
-#: Select something that looks like filename:linenum and open it in
-#: vim at the specified line number.
-
-
-#: The hints kitten has many more modes of operation that you can map
-#: to different shortcuts. For a full description see kittens/hints.
-#: }}}
-
-#: Miscellaneous {{{
-
-map kitty_mod+f11    toggle_fullscreen
-map kitty_mod+f10    toggle_maximized
-map kitty_mod+u      kitten unicode_input
-map kitty_mod+f2     edit_config_file
-map kitty_mod+escape kitty_shell window
-
-#: Open the kitty shell in a new window/tab/overlay/os_window to
-#: control kitty using commands.
-
-map kitty_mod+a>m    set_background_opacity +0.1
-map kitty_mod+a>l    set_background_opacity -0.1
-map kitty_mod+a>1    set_background_opacity 1
-map kitty_mod+a>d    set_background_opacity default
-map kitty_mod+delete clear_terminal reset active
-
-#: You can create shortcuts to clear/reset the terminal. For example::
-
-#:     # Reset the terminal
-#:     map kitty_mod+f9 clear_terminal reset active
-#:     # Clear the terminal screen by erasing all contents
-#:     map kitty_mod+f10 clear_terminal clear active
-#:     # Clear the terminal scrollback by erasing it
-#:     map kitty_mod+f11 clear_terminal scrollback active
-#:     # Scroll the contents of the screen into the scrollback
-#:     map kitty_mod+f12 clear_terminal scroll active
-
-#: If you want to operate on all windows instead of just the current
-#: one, use all instead of active.
-
-#: It is also possible to remap Ctrl+L to both scroll the current
-#: screen contents into the scrollback buffer and clear the screen,
-#: instead of just clearing the screen::
-
-#:     map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c
-
-
-#: You can tell kitty to send arbitrary (UTF-8) encoded text to the
-#: client program when pressing specified shortcut keys. For example::
-
-#:     map ctrl+alt+a send_text all Special text
-
-#: This will send "Special text" when you press the ctrl+alt+a key
-#: combination.  The text to be sent is a python string literal so you
-#: can use escapes like \x1b to send control codes or \u21fb to send
-#: unicode characters (or you can just input the unicode characters
-#: directly as UTF-8 text). The first argument to send_text is the
-#: keyboard modes in which to activate the shortcut. The possible
-#: values are normal or application or kitty or a comma separated
-#: combination of them.  The special keyword all means all modes. The
-#: modes normal and application refer to the DECCKM cursor key mode
-#: for terminals, and kitty refers to the special kitty extended
-#: keyboard protocol.
-
-#: Another example, that outputs a word and then moves the cursor to
-#: the start of the line (same as pressing the Home key)::
-
-#:     map ctrl+alt+a send_text normal Word\x1b[H
-#:     map ctrl+alt+a send_text application Word\x1bOH
-
-#: }}}
-
-# }}}
-#
-include dracula.conf
-
-# Zoom
-map alt+3 disable_ligatures_in tab cursor
-map ctrl+shift+plus change_font_size all +2.0
-map ctrl+shift+minus change_font_size all -2.0
-
-
-
-# extras
-map ctrl+shift+t launch --cwd=current --type=tab
-map ctrl+alt+shift+t launch --type=tab