From 45503702fdb366ad643f4827e50c0df7cf93980e Mon Sep 17 00:00:00 2001
From: Ekaitz Zarraga <ekaitz@elenq.tech>
Date: Wed, 13 Jan 2021 23:31:44 +0100
Subject: Reorder using Stow better

---
 i3/config    | 185 ------------------------------------------------------
 i3/i3/config | 201 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 201 insertions(+), 185 deletions(-)
 delete mode 100644 i3/config
 create mode 100644 i3/i3/config

(limited to 'i3')

diff --git a/i3/config b/i3/config
deleted file mode 100644
index ca89d6e..0000000
--- a/i3/config
+++ /dev/null
@@ -1,185 +0,0 @@
-# This file has been auto-generated by i3-config-wizard(1).
-# It will not be overwritten, so edit it as you like.
-#
-# Should you change your keyboard layout some time, delete
-# this file and re-run i3-config-wizard(1).
-#
-
-# i3 config file (v4)
-#
-# Please see https://i3wm.org/docs/userguide.html for a complete reference!
-
-set $mod Mod4
-
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-font pango:monospace 10
-
-# This font is widely installed, provides lots of unicode glyphs, right-to-left
-# text rendering and scalability on retina/hidpi displays (thanks to pango).
-#font pango:DejaVu Sans Mono 8
-
-# The combination of xss-lock, nm-applet and pactl is a popular choice, so
-# they are included here as an example. Modify as you see fit.
-
-# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
-# screen before suspend. Use loginctl lock-session to lock your screen.
-exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
-
-# NetworkManager is the most popular way to manage wireless networks on Linux,
-# and nm-applet is a desktop environment-independent system tray GUI for it.
-exec --no-startup-id nm-applet
-
-# Use pactl to adjust volume in PulseAudio.
-set $refresh_i3status killall -SIGUSR1 i3status
-bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status
-bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status
-bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
-bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
-
-# Brightness control
-bindsym XF86MonBrightnessUp exec light -A 10 # increase screen brightness
-bindsym XF86MonBrightnessDown exec light -U 10 # decrease screen brightness
-
-# Use Mouse+$mod to drag floating windows to their wanted position
-floating_modifier $mod
-
-# start a terminal
-bindsym $mod+Return exec kitty
-
-# kill focused window
-bindsym $mod+Shift+q kill
-
-# start dmenu (a program launcher)
-bindsym $mod+d exec dmenu_run
-# There also is the (new) i3-dmenu-desktop which only displays applications
-# shipping a .desktop file. It is a wrapper around dmenu, so you need that
-# installed.
-# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
-
-# change focus
-bindsym $mod+h focus left
-bindsym $mod+j focus down
-bindsym $mod+k focus up
-bindsym $mod+l focus right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Left focus left
-bindsym $mod+Down focus down
-bindsym $mod+Up focus up
-bindsym $mod+Right focus right
-
-# move focused window
-bindsym $mod+Shift+j move left
-bindsym $mod+Shift+k move down
-bindsym $mod+Shift+l move up
-bindsym $mod+Shift+ntilde move right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Shift+Left move left
-bindsym $mod+Shift+Down move down
-bindsym $mod+Shift+Up move up
-bindsym $mod+Shift+Right move right
-
-# split in horizontal orientation
-bindsym $mod+Shift+h split h
-
-# split in vertical orientation
-bindsym $mod+Shift+v split v
-
-# enter fullscreen mode for the focused container
-bindsym $mod+f fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-bindsym $mod+s layout stacking
-bindsym $mod+w layout tabbed
-bindsym $mod+e layout toggle split
-
-# toggle tiling / floating
-bindsym $mod+Shift+space floating toggle
-
-# change focus between tiling / floating windows
-bindsym $mod+space focus mode_toggle
-
-# focus the parent container
-bindsym $mod+a focus parent
-
-# focus the child container
-#bindsym $mod+d focus child
-
-# Define names for default workspaces for which we configure key bindings later on.
-# We use variables to avoid repeating the names in multiple places.
-set $ws1 "1"
-set $ws2 "2"
-set $ws3 "3"
-set $ws4 "4"
-set $ws5 "5"
-set $ws6 "6"
-set $ws7 "7"
-set $ws8 "8"
-set $ws9 "9"
-set $ws10 "10"
-
-# switch to workspace
-bindsym $mod+1 workspace number $ws1
-bindsym $mod+2 workspace number $ws2
-bindsym $mod+3 workspace number $ws3
-bindsym $mod+4 workspace number $ws4
-bindsym $mod+5 workspace number $ws5
-bindsym $mod+6 workspace number $ws6
-bindsym $mod+7 workspace number $ws7
-bindsym $mod+8 workspace number $ws8
-bindsym $mod+9 workspace number $ws9
-bindsym $mod+0 workspace number $ws10
-
-# move focused container to workspace
-bindsym $mod+Shift+1 move container to workspace number $ws1
-bindsym $mod+Shift+2 move container to workspace number $ws2
-bindsym $mod+Shift+3 move container to workspace number $ws3
-bindsym $mod+Shift+4 move container to workspace number $ws4
-bindsym $mod+Shift+5 move container to workspace number $ws5
-bindsym $mod+Shift+6 move container to workspace number $ws6
-bindsym $mod+Shift+7 move container to workspace number $ws7
-bindsym $mod+Shift+8 move container to workspace number $ws8
-bindsym $mod+Shift+9 move container to workspace number $ws9
-bindsym $mod+Shift+0 move container to workspace number $ws10
-
-# reload the configuration file
-bindsym $mod+Shift+c reload
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-bindsym $mod+Shift+r restart
-# exit i3 (logs you out of your X session)
-bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
-        # These bindings trigger as soon as you enter the resize mode
-
-        # Pressing left will shrink the window’s width.
-        # Pressing right will grow the window’s width.
-        # Pressing up will shrink the window’s height.
-        # Pressing down will grow the window’s height.
-        bindsym j resize shrink width 10 px or 10 ppt
-        bindsym k resize grow height 10 px or 10 ppt
-        bindsym l resize shrink height 10 px or 10 ppt
-        bindsym ntilde resize grow width 10 px or 10 ppt
-
-        # same bindings, but for the arrow keys
-        bindsym Left resize shrink width 10 px or 10 ppt
-        bindsym Down resize grow height 10 px or 10 ppt
-        bindsym Up resize shrink height 10 px or 10 ppt
-        bindsym Right resize grow width 10 px or 10 ppt
-
-        # back to normal: Enter or Escape or $mod+r
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-        bindsym $mod+r mode "default"
-}
-
-bindsym $mod+r mode "resize"
-
-# Start i3bar to display a workspace bar (plus the system information i3status
-# finds out, if available)
-bar {
-        status_command i3status
-}
diff --git a/i3/i3/config b/i3/i3/config
new file mode 100644
index 0000000..b599bdd
--- /dev/null
+++ b/i3/i3/config
@@ -0,0 +1,201 @@
+# This file has been auto-generated by i3-config-wizard(1).
+# It will not be overwritten, so edit it as you like.
+#
+# Should you change your keyboard layout some time, delete
+# this file and re-run i3-config-wizard(1).
+#
+
+# i3 config file (v4)
+#
+# Please see https://i3wm.org/docs/userguide.html for a complete reference!
+
+set $mod Mod4
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+font pango:monospace 10
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+#font pango:DejaVu Sans Mono 8
+
+# The combination of xss-lock, nm-applet and pactl is a popular choice, so
+# they are included here as an example. Modify as you see fit.
+
+# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
+# screen before suspend. Use loginctl lock-session to lock your screen.
+exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
+
+# NetworkManager is the most popular way to manage wireless networks on Linux,
+# and nm-applet is a desktop environment-independent system tray GUI for it.
+exec --no-startup-id nm-applet
+
+# Use pactl to adjust volume in PulseAudio.
+set $refresh_i3status killall -SIGUSR1 i3status
+bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status
+bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status
+bindsym XF86AudioMute        exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
+bindsym XF86AudioMicMute     exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
+
+# Brightness control
+bindsym XF86MonBrightnessUp   exec light -A 5  # increase screen brightness
+bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# start a terminal
+bindsym $mod+Return exec kitty
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym $mod+d exec dmenu_run
+# There also is the (new) i3-dmenu-desktop which only displays applications
+# shipping a .desktop file. It is a wrapper around dmenu, so you need that
+# installed.
+# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindsym $mod+h focus left
+bindsym $mod+j focus down
+bindsym $mod+k focus up
+bindsym $mod+l focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+h move left
+bindsym $mod+Shift+j move down
+bindsym $mod+Shift+k move up
+bindsym $mod+Shift+l move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+Control+h split h
+
+# split in vertical orientation
+bindsym $mod+Control+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1 "1"
+set $ws2 "2"
+set $ws3 "3"
+set $ws4 "4"
+set $ws5 "5"
+set $ws6 "6"
+set $ws7 "7"
+set $ws8 "8"
+set $ws9 "9"
+set $ws10 "10"
+
+# switch to workspace
+bindsym $mod+1 workspace number $ws1
+bindsym $mod+2 workspace number $ws2
+bindsym $mod+3 workspace number $ws3
+bindsym $mod+4 workspace number $ws4
+bindsym $mod+5 workspace number $ws5
+bindsym $mod+6 workspace number $ws6
+bindsym $mod+7 workspace number $ws7
+bindsym $mod+8 workspace number $ws8
+bindsym $mod+9 workspace number $ws9
+bindsym $mod+0 workspace number $ws10
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace number $ws1
+bindsym $mod+Shift+2 move container to workspace number $ws2
+bindsym $mod+Shift+3 move container to workspace number $ws3
+bindsym $mod+Shift+4 move container to workspace number $ws4
+bindsym $mod+Shift+5 move container to workspace number $ws5
+bindsym $mod+Shift+6 move container to workspace number $ws6
+bindsym $mod+Shift+7 move container to workspace number $ws7
+bindsym $mod+Shift+8 move container to workspace number $ws8
+bindsym $mod+Shift+9 move container to workspace number $ws9
+bindsym $mod+Shift+0 move container to workspace number $ws10
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        # These bindings trigger as soon as you enter the resize mode
+
+        # Pressing left will shrink the window’s width.
+        # Pressing right will grow the window’s width.
+        # Pressing up will shrink the window’s height.
+        # Pressing down will grow the window’s height.
+        bindsym h resize shrink width 10 px or 10 ppt
+        bindsym j resize grow height 10 px or 10 ppt
+        bindsym k resize shrink height 10 px or 10 ppt
+        bindsym l resize grow width 10 px or 10 ppt
+
+        # same bindings, but for the arrow keys
+        bindsym Left resize shrink width 10 px or 10 ppt
+        bindsym Down resize grow height 10 px or 10 ppt
+        bindsym Up resize shrink height 10 px or 10 ppt
+        bindsym Right resize grow width 10 px or 10 ppt
+
+        # back to normal: Enter or Escape or $mod+r
+        bindsym Return mode "default"
+        bindsym Escape mode "default"
+        bindsym $mod+r mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+        status_command i3status
+}
+
+
+## Clipboard Screenshots
+bindsym Print       exec --no-startup-id maim | xclip -selection clipboard -t image/png
+bindsym Shift+Print exec --no-startup-id maim --select | xclip -selection clipboard -t image/png
+
+
+# TODO:
+#bindsym XF86TouchpadToggle       exec xinput --disable 12
+#bindsym XF86TouchpadToggle       exec xinput --enable  12
+bindsym $mod+Shift+t exec xinput --enable  12
+bindsym $mod+t       exec xinput --disable  12
+
+
+# Keyboard layout change
+# bindsym $mod+x exec setxkbmap ru
-- 
cgit v1.2.3